{
  "store": "Hydroponics Company New Zealand",
  "website": "https://nfthydroponics.co.nz",
  "currency": "NZD",
  "count": 18,
  "products": [
    {
      "id": "clay-pebbles",
      "sku": "clay-pebbles",
      "title": "Expanded Clay Pebbles 907g Bag for Hydroponics and Potted Plants",
      "slug": "clay-pebbles",
      "price": 66.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "accessories",
      "category_label": "Accessories",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": "907 g",
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/accessories/clay-pebbles/main-clay-pebbles.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/clay-pebbles/clay-pebbles-2.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/clay-pebbles/clay-pebbles-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/clay-pebbles/clay-pebbles-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/clay-pebbles/clay-pebbles-5.jpg"
      ],
      "description_short": "A 907 g bag of 6 to 18 mm expanded clay balls, light, porous and pH neutral, ready to rinse and reuse across pots, net cups and hydroponic systems.",
      "description": "The problem with soil indoors\n\nSoil works. It has worked for a very long time. But bring it inside and a few things start to grate.\n\nIt is heavy. A 20 cm pot of damp potting mix is a surprising weight to lift onto a shelf. It compacts, so after a few months the roots are pushing through something closer to a brick than a growing medium. It holds organic matter, which means it holds moisture at the surface, which means gnats. And when you water it, fine particles wash out of the drainage holes and stain whatever the pot is sitting on.\n\nNone of that is a disaster. It is just friction. And if you are growing herbs on a kitchen bench or leafy greens under a light in the spare room, that friction adds up.\n\nExpanded clay pebbles are one way around it. They are clay balls fired until they puff up, like popcorn made from rock. Each ball has a hard outer shell and a maze of air pockets inside. That gives you something light, something that drains, and something that will not turn to sludge in the bottom of a pot.\n\nHow expanded clay actually works\n\nThe useful part is the combination of two things that usually fight each other, water and air.\n\nRoots need both. Too much water with no air and roots sit in stagnant conditions. Too much air with no water and the plant dries out between waterings. Soil balances this through its structure, but that structure degrades as the mix compacts.\n\nClay pebbles handle it differently. The pebbles themselves are porous, so they soak water into their interior and hold it there. The spaces between the pebbles stay open, because the balls are hard and do not squash down. So you get moisture inside the medium and air in the gaps, and that stays true whether the pot has been planted for a week or a season.\n\nThis bag contains pebbles between 6 mm and 18 mm. That mixed sizing is deliberate rather than a sign of poor sorting. Smaller pebbles settle into the gaps left by larger ones and carry more moisture per handful. Larger ones keep bigger air channels running through the pot. Together they give a medium that is neither too loose nor too tight for most home growing.\n\nThe other thing worth knowing is that expanded clay is inert and pH neutral. It does not feed the plant and it is not designed to push your water acidic or alkaline. If you are mixing a nutrient solution for basil or lettuce, that is exactly what you want. The medium holds the plant up and manages water. The feed does the feeding. Nothing unexpected in between.\n\nWho this suits\n\nHome growers running herbs and leafy greens are the obvious fit. Basil, mint, coriander, parsley, lettuce, rocket, spinach. These are plants with modest root systems that do well in net cups and small containers, and clay pebbles are a natural match.\n\nHouseplant people moving to semi hydro are the other big group. If you have been watching your pothos or monstera struggle in a dense mix, switching to clay balls in a pot with a water reservoir is a well trodden path. The roots adapt over a few weeks and you move from guessing when to water to simply topping up a level you can see.\n\nThere is a third group that just wants the practical bits. A drainage layer in a decorative pot with no hole. A top dressing to stop soil splashing up the leaves when you water. A humidity tray under a fussy plant. Clay pebbles do all of those jobs without any special knowledge.\n\nWho it suits less well: anyone growing something that genuinely wants a rich organic root zone and does not want to deal with feeding. If you are happy with soil and your plants are happy too, there is no reason to change.\n\nHow to choose and how much to buy\n\nVolume is the question people get wrong first. Weight is a confusing way to buy a bulky material, because expanded clay is light. This bag is 907 g, which sounds modest but goes further than the number suggests.\n\nAs a rough guide, one bag fills several small net cups comfortably, or gives you a drainage layer across a few medium pots, or fills one medium pot top to bottom. If you are setting up more than that, order two. Running out halfway through a repotting session is annoying, and having spare pebbles on hand means you can refresh a pot whenever you want.\n\nPebble size matters less than people expect for home use. The 6 to 18 mm range here covers small and medium containers well. Very large pebbles suit big outdoor planters where drainage is the priority. Very fine grades suit propagation. This middle range is the general purpose option, which is why it shows up in most starter hydroponic setups.\n\nOne more consideration. If you are using a pump system, think about mesh and filter sizes. The pebbles themselves will not pass through a net cup, but the dust that comes off a new bag can settle in lines. That brings us neatly to the one step people skip.\n\nRinse first, always\n\nNew expanded clay carries fine clay dust from manufacturing. It is not a flaw, it is just what happens when you fire and tumble clay.\n\nTip the pebbles into a colander or a bucket and run clean water through them, stirring with your hand, until the water comes out clear instead of cloudy. It takes a few minutes. Skip it and you will get a hazy reservoir, sediment in the bottom of your system and possibly some grit where you do not want grit.\n\nSome growers soak the pebbles for a few hours afterwards so they go into the pot already saturated. That is optional but sensible, particularly in a passive setup where dry pebbles would otherwise pull water away from the roots while they fill up.\n\nLooking after them between crops\n\nThis is where clay pebbles earn their keep. When a crop finishes, you do not throw the medium out.\n\nTip everything into a bucket. Pull out the old root mass by hand, then rinse the pebbles under running water until the runoff is clean. If there is stubborn material clinging on, a soak in plain water overnight loosens it. Rinse again, spread the pebbles out and let them dry fully before you bag them up.\n\nDry storage matters. Put damp pebbles in a sealed container and you will find something unpleasant growing on them next time you open it. A breathable bag or an open tub in a dry cupboard is fine.\n\nOver time pebbles can pick up mineral deposits from your water and feed. A rinse handles most of it. Some growers soak in a dilute vinegar solution for stubborn build up, then rinse very thoroughly afterwards. Whether you bother depends on your water and how much you care about appearance.\n\nA few honest limitations\n\nClay pebbles are not magic. They hold less water than soil per unit volume, so in a free draining pot with no reservoir you will be watering more often, not less. That is the trade off for all that air.\n\nThey also carry no nutrition. In soil, the mix itself provides something for the plant even if you forget to feed. In clay pebbles, if you forget to feed, the plant gets nothing. Set a reminder.\n\nAnd they are not silent. Pour a bag into a metal pot and it sounds like a hailstorm. Minor, but it surprises people.\n\nThe short version\n\nExpanded clay pebbles are fired clay balls that hold water inside and keep air moving between them. This bag has 907 g of pebbles sized 6 to 18 mm, which suits small and medium pots, net cups and container plants. They are light, inert and pH neutral, so they support the plant and stay out of the way of your feeding.\n\nRinse before first use. Feed consistently, because the medium gives nothing on its own. Wash and dry them between crops and put them straight back to work.\n\nIf you are growing herbs or leafy greens at home and the mess and weight of soil is wearing thin, this is a straightforward place to start.",
      "llm_summary": "This product is a 907 g bag of expanded clay pebbles, listed under brand Malifea, model cp2lbs. The pebbles measure 6 to 18 mm, a size suited to small and medium pots, net cups and garden containers. The material is light compared with potting soil, porous, inert and pH neutral, and the balls hold their shape after soaking rather than breaking apart. They can be rinsed and reused across growing cycles, and a rinse before first use removes manufacturing dust. Typical uses include hydroponic systems for herbs and leafy greens, drainage layers in pots, top dressing over soil and humidity trays. Package dimensions are 20.32 x 6.35 x 29.21 cm. Colour, exact material composition and country of origin are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/clay-pebbles/",
      "canonical_url": "https://nfthydroponics.co.nz/product/clay-pebbles/",
      "json_url": "https://nfthydroponics.co.nz/api/products/clay-pebbles.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 79.99
    },
    {
      "id": "ec-meter",
      "sku": "ec-meter",
      "title": "EC and TDS Conductivity Pen for Nutrient Solution",
      "slug": "ec-meter",
      "price": 357.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "accessories",
      "category_label": "Accessories",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": "0.11 kg",
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/accessories/ec-meter/main-ec-meter.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ec-meter/ec-meter-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ec-meter/ec-meter-4.jpg"
      ],
      "description_short": "A waterproof digital pen that shows EC, CF, ppm 500, ppm 700 and temperature, arrives factory calibrated, and switches itself off to save the battery.",
      "description": "The problem with mixing by the cap\n\nMost people start the same way. You buy a bottle of nutrient, read the dose on the back, pour the cap into the watering can, give it a swirl and feed the plants. Sometimes everything thrives. Other times the leaves go pale, or the tips burn, or growth just stalls for no reason you can see. You followed the same instructions both times, so what changed?\n\nUsually, the water did. Tap water is not blank. Depending on where you live, it already carries dissolved calcium, magnesium, sodium and a handful of other minerals before you add a single drop of feed. In some areas that starting load is barely noticeable. In others it is high enough that a standard dose pushes the solution well past where your plants want it. The bottle cannot know that, because the bottle has never met your tap.\n\nThen there is what happens after mixing. Plants drink water faster than they take up the dissolved salts in it, so a reservoir left for a few days quietly concentrates. The level drops, the strength climbs, and the recipe you started with is no longer the recipe your roots are sitting in. None of this is visible. You cannot look at a tank and see 1.4 EC.\n\nThat is the whole reason a conductivity pen exists. It turns an invisible variable into a number on a screen.\n\nHow a conductivity reading works\n\nThe science is simpler than the jargon suggests. Pure water is a poor conductor of electricity. Dissolved mineral salts split into charged particles that carry current easily. So if you pass a tiny current between two contacts on a probe tip, the amount that gets through tells you how much dissolved salt is in the water.\n\nThat is electrical conductivity, or EC. More dissolved nutrient means a higher reading. It really is that direct.\n\nThe one thing EC cannot do is tell you what those salts are. A reading of 1.6 could be a balanced feed, or it could be a tank with too much of one element and not enough of another, or it could be hard tap water with barely any nutrient in it at all. Conductivity measures the total, not the recipe. This matters mostly when something looks wrong and the number looks fine. In that case the answer is usually in your mixing routine, your water source or your pH, not in the meter.\n\nEC, CF, ppm 500 and ppm 700\n\nHere is where new growers get tangled, so it is worth being clear.\n\nEC is the raw measurement, usually written in millisiemens per centimetre. CF is just EC multiplied by ten, so EC 1.8 equals CF 18. Easy.\n\nppm is where it gets messy. Parts per million is an estimate of total dissolved solids converted from the conductivity figure, and the conversion needs a multiplier. Two multipliers became common in the industry, giving the ppm 500 scale and the ppm 700 scale. The same water will show two different ppm numbers depending on which scale you use, and the gap is large enough to matter. Someone telling you online to feed at 800 ppm has told you almost nothing unless they say which scale they mean.\n\nThis pen displays all four, which is the practical fix. Set it to the unit your nutrient chart uses, and you never have to convert anything. If you switch nutrient brands later and the new chart speaks a different language, you change the pen rather than doing arithmetic over a reservoir.\n\nWhy temperature is on the screen too\n\nA digital TDS meter that also reads temperature saves you a second tool, but the real value is interpretive. Water temperature affects how quickly roots take up both water and nutrient, and it affects how much dissolved oxygen the solution can hold. A cold reservoir in winter slows everything down. A warm one in late summer holds less oxygen and tends to push plants harder.\n\nSo when two tanks with the same EC produce different results, temperature is often the missing piece. Having both numbers in front of you builds the mental model faster than either one alone. The listed upper temperature range on this pen is 50 degrees Celsius, which comfortably covers normal growing conditions.\n\nWho gets the most out of one\n\nAnyone running a hydroponic system benefits immediately, because in hydroponics the solution is the only food source and small drift shows up quickly. If you are growing basil, lettuce, rocket, spinach, tomatoes or cucumbers in a recirculating setup, a nutrient strength tester moves you from guessing to knowing in about a week of use.\n\nContainer growers using liquid feed get a quieter benefit. You may only test the feed water before it goes on, but that is enough to catch an over-strength mix before it reaches roots. People with very hard or very soft tap water get the biggest surprise of all when they first measure their baseline.\n\nIt is less essential if you grow in rich soil beds and rarely use liquid feed. There, the soil buffers most of what you do, and the number tells you less.\n\nBuilding a simple routine\n\nStart by testing your tap water with nothing added. Write that number down. That is your floor, and every nutrient dose sits on top of it.\n\nMix your tank to the dose on the chart, stir it properly, then take a reading from the middle of the water. Stirring matters more than people expect, because nutrient can sit unevenly for a while after pouring. If the reading lands near the chart target, you know the dose suits your water. If it overshoots, your tap water was contributing more than the chart assumed and you dilute accordingly.\n\nAfter that, check every day or two. If the number climbs while the level drops, the plants are drinking water faster than nutrient and a plain water top-up will bring it back. If the number falls, they are feeding heavily and you may need to refresh. Either way you are responding to what is happening rather than to a calendar.\n\nA small notebook beside the reservoir, with date, EC and temperature, turns this into a pattern you can actually read after a month.\n\nLooking after the pen\n\nThe single most important habit is rinsing the probe tip with clean water after every reading and shaking off the excess. Nutrient residue left to dry on the contacts is the usual cause of drifting readings. Regular cleaning is recommended for exactly this reason.\n\nDo not scrub the tip with anything abrasive. Store the pen capped, dry and out of direct sun. If it is going into a drawer for the off season, take the AAA battery out first. The auto off function and low battery indicator handle most of the day-to-day battery worry, but a cell left in an unused device for months is asking for trouble.\n\nA probe care kit is available separately if you want a dedicated cleaning solution. It is not included with the pen.\n\nPairing it with pH\n\nConductivity and pH are the two halves of nutrient management. EC tells you how much food is in the water. pH tells you whether the roots can actually absorb it. A perfectly dosed tank at the wrong pH can still produce deficiency symptoms, because certain elements lock out at the edges of the range.\n\nMost growers who stick with hydroponics end up with one pen for each. If you are buying your first meter and can only pick one, the choice depends on your water. Unstable pH causes faster, more dramatic problems. Unknown mineral content causes slower, more confusing ones.\n\nThe short version\n\nAn EC meter answers a question you cannot answer by looking. It tells you how much dissolved nutrient is in your water, right now, in the unit your feed chart speaks. This pen reads EC, CF, ppm 500 and ppm 700 plus temperature, arrives factory calibrated so you can use it straight away, is waterproof, shuts itself off to save power, and runs on the AAA battery included in the box.\n\nTest your tap water first. Mix, stir, measure. Rinse the tip afterwards. Do that for a few weeks and you will stop wondering why one crop did better than the last, because you will have the numbers that explain it.",
      "llm_summary": "The Bluelab PENCON conductivity pen is a handheld digital meter for measuring nutrient strength in water. It displays readings in EC, CF, ppm 500 and ppm 700, and also shows temperature, with an upper temperature range of 50 degrees Celsius. The unit is waterproof, has a digital display, an auto off function and a low battery indicator, and runs on one AAA battery, which is included. It arrives factory calibrated, so calibration before first use is optional, and regular cleaning of the probe is recommended for accurate readings. Outer material is plastic and the colour is white. Item weight is listed as 0.24 pounds, shipping weight 0.11 kg. A probe care kit is sold separately. Dimensions and country of origin are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/ec-meter/",
      "canonical_url": "https://nfthydroponics.co.nz/product/ec-meter/",
      "json_url": "https://nfthydroponics.co.nz/api/products/ec-meter.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 429.99
    },
    {
      "id": "hydroponic-grow-baskets",
      "sku": "hydroponic-grow-baskets",
      "title": "Hydroponic Grow Baskets and Seed Pod Labels (100 Pieces)",
      "slug": "hydroponic-grow-baskets",
      "price": 71.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "accessories",
      "category_label": "Accessories",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/accessories/hydroponic-grow-baskets/main-hydroponic-grow-baskets.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/hydroponic-grow-baskets/hydroponic-grow-baskets-2.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/hydroponic-grow-baskets/hydroponic-grow-baskets-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/hydroponic-grow-baskets/hydroponic-grow-baskets-6.jpg"
      ],
      "description_short": "Fifty white plastic baskets with a grooved base for water flow, plus fifty PVC seed pod labels so you always know what is growing where.",
      "description": "The problem nobody mentions when you buy a countertop garden\n\nIndoor hydroponic units sell on the easy part. Drop in a pod, add water, flick the light on, pick basil in a few weeks. All true. What the box does not tell you is that the pods are consumable, and the baskets that hold them get claimed by roots fast.\n\nThree weeks after your first harvest you go to plant again and hit two problems at once. The baskets are packed with dried root matter that does not want to come out, and you have no idea which of the four identical green seedlings in the lid is the coriander. Both problems are small. Both are annoying enough to make people leave the unit sitting empty on the bench for a month.\n\nA spare set of baskets and a sheet of labels fixes it. That is the whole idea behind this 100 piece set. Fifty white plastic hydroponic grow baskets and fifty seed pod labels, so you can start a new round the same day you finish the old one.\n\nWhat a grow basket actually does\n\nThe basket is the small round pod that sits in a hole in your lid. Inside it goes a growing sponge, and inside the sponge goes the seed. The basket keeps the sponge upright and positioned at the right depth, with the base sitting close enough to the water or nutrient film for the roots to reach it.\n\nThe important part is the bottom. These baskets use a grooved, open base rather than a solid floor. Water and nutrient solution can move freely around the lower part of the sponge, and roots can push out through the gaps as the plant grows. On a basket with poor flow you get soggy patches and roots that circle instead of spreading.\n\nThere is a practical bonus too. When roots can grow out rather than coiling tight inside a cup, pulling a finished plant out at the end of a cycle is far less of a wrestle. You lift, the root mass comes with it, and the basket is ready for a rinse.\n\nEach basket in this set is listed at 0.5 inch size, which works out to roughly 44 mm across and 64 mm tall. That is the common small pod format used across many countertop units.\n\nChecking that they fit\n\nThis is the one thing worth doing before you order anything. Pod sizes are not universal. Most countertop hydroponic gardens use something around the 44 mm mark, but not all of them.\n\nTake one of your existing baskets out and measure across the widest part of the rim with a ruler. If you no longer have one, measure the hole in the lid instead and allow for the rim sitting on top. Compare that to 44 mm. If the numbers are close, these replacement grow baskets should drop in without fuss.\n\nIf your system uses larger net cups, this set is the wrong size for you. Those are a different product aimed at bigger builds rather than kitchen bench gardens.\n\nSponges are a separate purchase\n\nWorth saying plainly, since it catches people out. This set is baskets and labels. No growing sponges.\n\nSponges are the compressed medium that holds the seed and the moisture, and they are genuinely consumable. You use one per planting and then it goes in the bin or the compost with the old roots. Keep a pack in the cupboard alongside your spare baskets and you will never be stuck mid-sow.\n\nIf you prefer, you can use rockwool cubes or similar media cut to size, provided they sit snugly in the pod. Loose media falls through the grooves, so whatever you use needs to hold its shape.\n\nWhy the labels matter more than they sound\n\nFifty PVC stickers is not a glamorous feature. It is the one that saves the most frustration.\n\nSeedlings of different herbs look remarkably similar for the first fortnight. Rocket, basil, coriander and parsley all come up as small green things. If you sowed four varieties on the same afternoon, you will be guessing right up until the leaves mature, and by then you have already watered the wrong pod or harvested too early.\n\nA label with the variety and the sow date written on it removes all of that. It also helps you learn. After a couple of rounds you start to see patterns, like which crops are reliably ready in three weeks and which ones sulk under your particular light.\n\nApply them to a clean, dry surface and press the whole label down, not just the middle. A fine permanent marker writes well on PVC. Most people stick them on the basket rim or on the lid beside each hole.\n\nKeeping the set in good shape\n\nCleaning takes less time than people expect. When a plant is finished, pull the sponge and the root mass out as one piece. Drop the empty basket in a bowl of warm water to soak for a few minutes, which softens anything clinging to the grooves.\n\nA soft brush or an old toothbrush clears the rest. Rinse, then leave the baskets out to dry completely before you put them back in the drawer. Storing them damp is how you end up with a musty smell and a film you have to scrub off later.\n\nIf you are in a hard water area you may notice a white mineral haze building on the plastic over a few cycles. A short soak in diluted vinegar followed by a good rinse sorts it out.\n\nHand washing is better than the dishwasher for small plastic parts. They move around on a hot cycle and it is not worth the risk of warping something that fits a specific hole.\n\nA few habits that make the set go further\n\nUse spare baskets as blanks. Any pod hole you are not planting should have an empty basket sitting in it. That keeps light out of the reservoir, which keeps algae down, and stops dust and kitchen crumbs falling into the water.\n\nStagger your sowings. Rather than planting six pods at once and harvesting them all in the same week, plant two or three every fortnight. You get a steady supply instead of a glut, and you always have clean baskets in rotation because you are never resetting the whole unit at once.\n\nKeep a small container just for this. Baskets, labels, marker, sponges, all in one box on a shelf. It sounds trivial. It is the difference between replanting on a Sunday morning and putting it off for three weeks.\n\nWho this set suits\n\nAnyone already running a countertop hydroponic garden for herbs, salad leaves or small fruiting plants is the obvious fit. It is also useful for people who like to start seedlings indoors before moving them out to soil, since the sponge and seedling transplant easily and the basket is reusable.\n\nIt works as a practical gift for a keen indoor gardener too. Spare parts are the thing people never buy for themselves and always need.\n\nIt is not the right purchase if you run a larger build with bigger net cups, or if you were hoping for a complete starter kit. There is no pump, no nutrient and no sponge here.\n\nThe short version\n\nFifty white plastic grow baskets and fifty PVC labels, sized at roughly 44 mm across, with a grooved base that lets water and nutrients move around the roots. Washable and reusable. Indoor use. Sponges sold separately.\n\nMeasure your pod opening before ordering. If it is close to 44 mm, this set keeps your bench garden planted, labelled and running without the usual stop and start.",
      "llm_summary": "This is a 100 piece hydroponic accessory set from Cunhill containing 50 white plastic grow baskets and 50 PVC seed pod labels. Each basket is listed at 0.5 inch size, measuring approximately 44 mm in diameter by 64 mm high, round in shape with a grooved, draining base that allows water and nutrient solution to circulate around plant roots. The baskets are intended as replacements for countertop hydroponic gardens that use pod baskets with growing sponges. Growing sponges are not included. Material is listed as plastic polyvinyl chloride (PVC), colour white, finish unfinished, for indoor use. Package dimensions are 27 x 13.5 x 4.5 cm. Product weight, country of origin, GTIN and MPN are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/hydroponic-grow-baskets/",
      "canonical_url": "https://nfthydroponics.co.nz/product/hydroponic-grow-baskets/",
      "json_url": "https://nfthydroponics.co.nz/api/products/hydroponic-grow-baskets.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 85.99
    },
    {
      "id": "ph-meter",
      "sku": "ph-meter",
      "title": "Waterproof Digital pH Meter Pen Kit",
      "slug": "ph-meter",
      "price": 225.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "accessories",
      "category_label": "Accessories",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": "0.11 kg",
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-meter/main-ph-meter.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-meter/ph-meter-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-meter/ph-meter-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-meter/ph-meter-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-meter/ph-meter-6.jpg"
      ],
      "description_short": "A waterproof digital pH tester with automatic calibration, automatic temperature compensation from 0 to 50 C and a 0.1 pH resolution, supplied as a kit with pH 4 and pH 7 buffers, a lanyard and a carry case.",
      "description": "The problem with guessing\n\nAnyone who has grown lettuce or basil in water instead of soil has had the same week. The plants looked fine, then the newer leaves went pale, then the growth slowed, and nothing about the feeding routine had changed. The nutrient bottle said the right dose. The tank was full. The light was on the same timer.\n\nVery often the answer is pH. Plants take up different nutrients at different pH levels, and a reservoir that has drifted out of range can be packed with food that the roots simply cannot absorb. Soil is forgiving about this because it buffers small swings. A tank of water is not. Topping up with tap water moves the number. Plants drinking the solution move the number. A dose of nutrients moves the number. Over a week, a tank left alone can wander a long way.\n\nThat is the whole case for keeping a pH meter next to the reservoir. Not as a hobby gadget, but as the thing that turns \"something is wrong\" into \"the pH is 7.4, that explains it\".\n\nHow a pH pen works\n\nThe business end of a pocket pH meter is a glass sensor that responds to the acidity of whatever liquid it is sitting in. The meter reads that tiny electrical signal and converts it into the number on the screen. That is the short version, and it is enough to use one properly.\n\nTwo features do most of the heavy lifting on this model. The first is automatic temperature compensation, which works across 0 to 50 C (the listing also gives it as 32 to 122 F). Temperature changes the signal the sensor produces, so without compensation the same tank would read differently at 12 C and 28 C. With it, the meter corrects for the water temperature and gives you a figure you can act on.\n\nThe second is automatic calibration. You dip the sensor in the supplied pH 7 buffer, then the pH 4 buffer, and the meter recognises each one and sets itself. There is no menu wrangling and no entering values. If a buffer is wrong or the calibration does not complete properly, the meter tells you rather than quietly carrying on with a bad reference point.\n\nReadings come through in about five seconds, with a stability indicator so you know when the number has settled. Resolution is 0.1 pH across the 0 to 14 range. That is the level nutrient labels and pool guides are written at, so it matches the way you will actually use it.\n\nWho it suits\n\nHome growers running herbs, leafy greens and vegetables in a recirculating system are the obvious fit. If you are mixing nutrients into a reservoir, you need to know where the pH sits before and after you dose, and a digital pH tester you can grab with one hand makes that a thirty second job.\n\nPool and spa owners are the second big group. Water balance drives whether your sanitiser works and whether the water feels comfortable, and a pen beats test strips for reading small differences.\n\nThen there is everyone else. Home brewers checking a mash or a kombucha batch. Aquarium keepers checking a sample cup. People on tank water who want to know what is coming out of the pipe. Teachers running a science lesson. The device is the same in every case, it is just the liquid that changes.\n\nIt is worth being clear about what it does not do. This measures pH only. Nutrient strength is a separate measurement handled by an EC or TDS meter. Plenty of growers own both, because they answer different questions. pH tells you whether the plants can use the food. Strength tells you how much food is in there.\n\nWhat to look at when choosing\n\nResolution and range. A 0 to 14 range covers everything a home user will meet. Resolution of 0.1 pH is the right level for nutrient work and pool water. Finer resolution exists, but it costs more and brings a calibration routine that is harder to keep up with.\n\nTemperature compensation. This matters more than people expect, especially if your reservoir lives in a shed or a greenhouse where the temperature swings through the day. Automatic compensation means you do not have to think about it.\n\nWhat the kit includes. A meter with no buffer solution is only half a purchase. This one ships with pH 4 and pH 7 buffers, a lanyard, 4 AAA batteries and a hard carry case. That is the difference between testing on the day it arrives and waiting for a second parcel.\n\nWaterproofing. Testing water means being near water. A waterproof body with a stated immersion depth of 10 cm handles splashes, drips and the occasional slip into a bucket. It does not mean you can drop the whole pen into a deep tank and fish it out later.\n\nPower. This runs on AAA batteries, with up to 2000 hours of operation quoted. There is no charging cable to lose and no battery that degrades over the years. Keep a spare set in the carry case and you will never be caught out.\n\nSize. At 218 mm long and 0.11 kg, it is a pen you can clip to a lanyard and carry around a greenhouse without noticing.\n\nGetting good numbers out of it\n\nCalibration is the habit that separates useful readings from decorative ones. Calibrate with fresh buffer before any session where the result matters, and never pour used buffer back into the bottle. Two-point calibration with pH 4 and pH 7 takes a couple of minutes and covers the acidic side of the scale where nutrient work lives.\n\nRinse the sensor with clean water between samples. Carrying a few drops of pH 4 buffer into your reservoir reading will skew the result, and so will leftover nutrient solution when you move to a pool sample. Blot the tip dry with a soft tissue rather than rubbing it.\n\nWhen you adjust pH, go slowly. Add a small amount of pH up or pH down with the water circulating, wait a few minutes, then measure again. The fast reading time makes that loop painless. Dosing heavily and measuring once is how people end up chasing the number back and forth all evening.\n\nKeep a short log if you can. Date, pH, water temperature, what you added. Three weeks of notes will show you how fast your particular tank drifts, and after that you will know when to check without being told.\n\nCare and storage\n\nThe care instruction on this unit is hand wash only. Rinse after each use, cap it, and put it back in the case. Do not leave the sensor sitting in solution permanently, because this is a spot-check tool rather than a continuous probe.\n\nIf the pen is going into storage for a long stretch, take the batteries out. A dried-out sensor can be slow or drifty when you come back to it, so give the tip a soak in clean water before you calibrate again. Treat the buffer sachets like any other consumable and keep sealed stock on hand.\n\nThe carry case earns its keep here. Buffers stay with the meter, the lanyard does not vanish, and the pen is not rolling around in a drawer with the secateurs.\n\nThe short version\n\nA pH meter stops you guessing. For hydroponics it is close to essential, because a reservoir will drift and your plants cannot tell you why they have stopped growing. For pools, spas, brewing and general water checks it saves you squinting at a colour chart.\n\nThis one is a waterproof digital pen with 0.1 pH resolution, a five second response, automatic calibration against the included pH 4 and pH 7 buffers, and temperature compensation from 0 to 50 C. It runs on four AAA batteries, which are in the box, and quotes up to 2000 hours of operation. Everything packs into a carry case with a lanyard.\n\nCalibrate it regularly, rinse it after every reading, and it will give you a number you can act on in less time than it takes to fill a watering can.",
      "llm_summary": "The Apera Instruments PH20 (model AI209) is a waterproof, battery-powered digital pH meter pen sold as a regular kit. It measures across 0 to 14 pH with 0.1 resolution and a response time of about 5 seconds, with automatic temperature compensation covering 0 to 50 C (32 to 122 F). Automatic calibration recognises the supplied pH 4 and pH 7 buffer solutions. The kit includes the meter, buffers, a lanyard, a carry case and 4 AAA batteries, with up to 2000 hours of operation quoted. Immersion depth is 10 cm, item length 218 mm, weight 0.11 kg, outer material plastic, care hand wash only. CE and RoHS are listed. Colour, country of origin and overall case dimensions are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/ph-meter/",
      "canonical_url": "https://nfthydroponics.co.nz/product/ph-meter/",
      "json_url": "https://nfthydroponics.co.nz/api/products/ph-meter.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 270.99
    },
    {
      "id": "ph-up-and-down",
      "sku": "ph-up-and-down",
      "title": "pH Up and Down Control Kit with Test Strips",
      "slug": "ph-up-and-down",
      "price": 106.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "accessories",
      "category_label": "Accessories",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-up-and-down/main-ph-up-and-down.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-up-and-down/ph-up-and-down-2.jpg",
        "https://nfthydroponics.co.nz/dropship-images/accessories/ph-up-and-down/ph-up-and-down-4.jpg"
      ],
      "description_short": "Two 250 ml concentrated solutions, a measuring cup, a dropper, pH test strips and a colour chart, so you can check your water and nudge it where your plants want it.",
      "description": "The problem nobody warns you about\n\nYou mix your nutrients carefully. You measure everything. The plants still look sulky, the new leaves come through pale, and nothing you add seems to help. Most of the time, the issue is not what is in the water. It is the pH of the water.\n\nPlant roots only take up nutrients across a certain band of acidity. Push outside that band and the nutrients are still sitting there in the tank, perfectly measured and completely unavailable. Iron locks out first, then other trace elements, and you end up feeding more of something the plant cannot actually use. It is a frustrating problem precisely because it looks like a feeding problem.\n\nA pH up and down kit is the fix, and it is a small one. Two bottles, a way to measure a dose, and a way to check the result. That is the whole job.\n\nHow pH adjusters actually work\n\nThe pH scale runs from very acidic to very alkaline, with neutral in the middle. Most tap water sits somewhere on the alkaline side, and most plants grown in water or in a soilless medium prefer things a bit more acidic, usually somewhere between 5.5 and 6.5.\n\npH Down lowers the reading. In this kit it is formulated with phosphoric acid, which is one of the common choices for a hydroponic pH adjuster. It brings the number down and also contributes phosphorus, which plants use anyway.\n\npH Up lifts a reading that has dropped too far. This one uses buffering agents. You will reach for it less often if your tap water is hard, but coco coir growers and anyone running a reservoir for several weeks will find they need it.\n\nBoth bottles are concentrated. The guide dose is about 3 ml per litre, which means a small squeeze does real work. That is good for economy and bad for anyone with a heavy hand, which is why the dropper in the box matters more than it looks.\n\nWho this kit suits\n\nIf you grow herbs, leafy greens or vegetables in any kind of water-based or container system, you are the target buyer. Deep water culture tubs, drip systems, nutrient film setups, coco coir pots, raised beds watered by hand, aquaponic tanks and a tray of basil on a kitchen bench all respond to pH.\n\nBeginners get the most immediate value, because the kit bundles the testing and the adjusting together. You are not trying to work out which bottle to buy first and which strips match which chart. Experienced growers tend to keep a kit like this as a backup even if they run a meter and buy larger bottles, simply because it is handy to have both directions covered.\n\nIt suits anyone whose water has been diagnosed as the problem. If you have ruled out light, temperature and feeding and still have odd leaf colour, pH is the next place to look.\n\nChoosing the right approach for your setup\n\nThree things decide how you should use a pH control kit: your water, your volume and how often you change your solution.\n\nStart with your water. Fill a jug, test it with a strip, and write the number down. That single reading tells you which bottle you will mostly use. Hard water from the mains usually means pH Down does the heavy lifting. Rainwater or filtered water can swing the other way.\n\nThen think about volume. A twenty litre reservoir and a two litre jug need very different doses. Working from the 3 ml per litre guide, a small jug might need under a millilitre, which is a dropper job. A reservoir is where the measuring cup earns its keep, because you can pre-measure a dose and add it in one go rather than pouring blind.\n\nFinally, consider how often you top up or change. Systems that get topped up with fresh water daily will drift daily, because you are adding untreated water to a treated tank. Systems that get a full change every week or two are steadier between changes but swing harder at changeover. Neither is wrong, but the first needs more frequent small corrections.\n\nA quick word on the strips. They give a colour-coded result against the included chart, which is quick, portable and perfectly adequate for everyday checks. They are a visual comparison rather than a precise instrument, so if you are running a bigger system or chasing a specific target, a pH meter alongside the strips gives you the best of both. The strips become your fast check, the meter becomes your reference.\n\nDosing without overshooting\n\nHere is the routine that saves the most frustration.\n\nMix your nutrients into the water first. Nutrients change pH, so adjusting before you add them is wasted effort. Stir properly and give it a minute to settle.\n\nTest with a strip and compare it to the chart. Decide which direction you need to move.\n\nAdd a small dose. Smaller than you think. For a bucket, a few millilitres from the dropper. For a reservoir, measure into the cup and pour it in while the water is moving or stir it through.\n\nWait. Five minutes is a reasonable pause for the solution to distribute. Then test again.\n\nRepeat if needed. Two or three small steps will always beat one confident pour, and you will not end up reaching for the other bottle to undo your own work.\n\nIf you overshoot, do not panic and do not dump the tank. A tiny amount of the opposite solution will bring it back. Just go even slower on the way back.\n\nHandling and storage\n\nThe pH Down solution contains phosphoric acid, so treat it with respect. Wear gloves. Keep it off your skin and away from your eyes. Work over a sink or a tray where a spill is easy to wipe up, and rinse anything that gets splashed with clean water.\n\nBoth bottles need to be kept out of reach of children and pets, stored well away from food and drink. Cap them tightly, keep them upright, and park them somewhere cool and dark. Direct sun on a shelf is not where these belong.\n\nShake each bottle before you use it, as the listing advises. Rinse the measuring cup and the dropper with clean water after every session and let them dry. Keep the test strips sealed and dry, and handle them with dry fingers, because damp strips give you a reading you cannot trust.\n\nCommon mistakes worth avoiding\n\nAdjusting before adding nutrients is the big one, and almost everybody does it once.\n\nChasing a single decimal point is another. A stable reading inside the band is far better for plants than constant fiddling to hit an exact number. If your solution sits at 6.1 and stays there, leave it alone.\n\nIgnoring run-off in coco coir is a third. The water going in is only half the story. What comes out the bottom tells you what the root zone is actually experiencing.\n\nAnd using tired strips. They are cheap to replace and they are the one part of the kit that quietly degrades if they get damp. If the colours look washed out, get fresh ones.\n\nThe short version\n\nYour plants can only eat what the water lets them reach. This kit gives you both bottles you need, a cup and dropper so you can dose small, and strips with a chart so you can see what you have done. Mix nutrients first, test, add a little, wait, test again.\n\nGloves on for the pH Down, bottles capped and out of reach of children, and a note somewhere of how much your particular tap water needs. Do that once and the rest becomes routine. Most growers find pH is the easiest big problem they ever fix.",
      "llm_summary": "This is a two-part pH control kit for home growers, supplied as one 250 ml bottle of pH Up and one 250 ml bottle of pH Down. The pH Down solution is formulated with phosphoric acid, and the pH Up solution uses buffering agents. The kit also includes a measuring cup, a dropper, pH test strips and a colour chart for checking readings. The listed guide dose is about 3 ml per litre, added gradually with re-testing between doses, and the suggested working range is 5.5 to 6.5. It is described as suitable for hydroponics, coco coir, soil gardens, aquaponics and indoor or outdoor pots. Brand is GIDIGI, model GX-pHControl. Weight, dimensions, colour, material and country of origin are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/ph-up-and-down/",
      "canonical_url": "https://nfthydroponics.co.nz/product/ph-up-and-down/",
      "json_url": "https://nfthydroponics.co.nz/api/products/ph-up-and-down.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 127.99
    },
    {
      "id": "carbon-filter",
      "sku": "carbon-filter",
      "title": "4 Inch Inline Carbon Filter for Grow Tents",
      "slug": "carbon-filter",
      "price": 304.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "grow-tents",
      "category_label": "Grow Tents",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": "2.48 kg",
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/main-carbon-filter.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/carbon-filter-10.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/carbon-filter-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/carbon-filter-6.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/carbon-filter-7.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/carbon-filter-8.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/carbon-filter/carbon-filter-9.jpg"
      ],
      "description_short": "A 4 inch (100 mm) duct opening, 38 mm bed of virgin charcoal, reversible aluminium flanges and galvanised steel mesh, supplied with two hanging straps, two rope clips and two pre-filters.",
      "description": "The problem nobody warns you about\n\nPeople plan an indoor grow around light and water. They measure the tent, work out the shelf height, buy a timer. Then the first real crop of basil comes in, or a tray of compost gets turned, and the whole hallway smells like a garden centre.\n\nThat is the part a carbon filter solves. Not light, not watering, not heat. Smell. A sealed tent concentrates every scent inside it, and the moment air leaves through the exhaust duct, all of that scent goes with it into the room.\n\nThe fix is simple in principle. You put a bed of activated charcoal in the path of the air leaving your tent. Charcoal is full of tiny pores, and odour molecules stick to the walls of those pores as they pass through. What comes out the other end is far less noticeable.\n\nHow this filter is put together\n\nAir enters through the galvanised steel mesh on the outside of the body. It then passes through a 38 mm layer of RC412 charcoal, rated at 1200+ IAV, and out through a second mesh layer into the central duct opening. From there it goes into your ducting.\n\nThe duct opening is 4 inches, or 100 mm, which is the size most compact tents and their fans use. The body is 12 inches long, around 30 cm, and the whole thing weighs 2.48 kg. Two hanging straps and two rope clips come in the box, which is usually all you need to suspend it from the top bars of a tent.\n\nThe flanges are aluminium and they can be reversed. That is a genuinely useful detail. Carbon beds do not wear evenly, because air tends to find the easiest path and work through one section first. Turning the filter around partway through its life spreads that out.\n\nThere is also a cloth pre-filter, and two of them are supplied. The sleeve goes over the outside of the body. It catches dust from the tent and any loose carbon residue from inside, which keeps your fan blades and ducting cleaner. Two means one can be washing while the other keeps working.\n\nThe fan is a separate purchase\n\nThis is worth saying plainly, because it catches people out. A carbon filter has no motor. It cannot pull air through itself. You need an inline duct fan, and that fan is not included with this filter and is not sold here.\n\nSo your shopping list is three items, not one. Filter, fan, ducting. Plus a couple of duct clamps, which are cheap and often come with the ducting.\n\nWhen you pick the fan, look at its airflow figure against the filter's 210 CFM rating. You do not want a fan that massively overshoots, because air that moves too fast through the charcoal has less contact time and the odour control suffers. A fan at or below that rating, ideally one with a speed controller, gives you room to adjust.\n\nWorking out whether 4 inch is your size\n\nDuct size follows tent size, roughly. A 4 inch system suits small and medium tents, the kind of footprint you would set up in a spare room, a garage corner or a laundry. Once you get into larger rooms with multiple lights and higher heat loads, you move up to 6 inch and the equipment gets correspondingly bigger.\n\nThe easiest check is your existing gear. If you already own a fan, look at its duct diameter. If it is 100 mm, this filter bolts straight into that system. If it is 150 mm, you need the larger filter instead, and adapters are a poor substitute because they choke the airflow.\n\nIf you are starting from scratch, think about how much air you want to move. Small tents need the air changed often, but the total volume is low, which is exactly what a 4 inch setup is built for.\n\nExhaust or intake\n\nMost people hang the filter inside the tent, high up, with the fan after it. Air is pulled through the charcoal first and then through the fan, then out the duct. That keeps the fan clean and puts the filter where the warm, scented air collects.\n\nYou can also run it on the intake side if your layout calls for it, since air passes through the bed in either direction. This is less common for odour work but can help if your incoming air is coming from a dusty or smelly space.\n\nEither way, keep the duct runs short and avoid sharp bends. Every bend costs you airflow, and flexible duct scrunched into a tight corner costs a lot.\n\nLooking after it\n\nCarbon filters are low maintenance, but there are a few things that shorten their working life unnecessarily.\n\nKeep it dry. Charcoal that gets wet is charcoal that is busy holding water rather than odour. Do not spray water near it, do not run it in a tent at extreme humidity if you can avoid it, and never try to rinse the bed out.\n\nWash the pre-filter when it looks grey. Hand wash or machine wash it, then dry it fully before refitting. A damp sleeve pulls moisture straight into the carbon.\n\nHandle it gently. Dropping a filter can settle the charcoal inside and leave a gap at the top of the bed, which air will then take as a shortcut. Carry it upright and store it upright.\n\nFlip it when it is partway through its life. Unbolt the flange, turn the body around, reconnect. It takes five minutes and makes better use of the carbon you already own.\n\nWhen it is time to replace\n\nThere is no clock on a carbon filter. How long one lasts depends on running hours, how strong the odour load is, and how humid the air has been. A filter running twenty-four hours a day in a damp space will be finished long before one running a few hours a day in dry conditions.\n\nThe sign is always the same. Smell starts getting through the exhaust when it did not before. Once that happens, the bed is saturated and no amount of cleaning will bring it back. Replace the whole unit.\n\nA sensible setup checklist\n\nBefore you order, confirm four things. Your tent takes 100 mm ducting. You have, or are buying, an inline fan with airflow in a sensible range for 210 CFM. You have enough headroom inside the tent for a 30 cm filter hanging from the top bars. And you have duct and clamps to join it all together.\n\nOnce those line up, the install is straightforward. Hang the filter with the supplied straps, slide the pre-filter sleeve over it, clamp the duct to the flange, clamp the other end to the fan, and run the fan outlet to wherever you are venting.\n\nThe short version\n\nA carbon filter is the part of a grow tent that keeps the smell where it belongs. This one has a 4 inch (100 mm) duct opening, a 38 mm bed of RC412 charcoal at 1200+ IAV, reversible aluminium flanges, galvanised steel mesh and a 210 CFM airflow rating. It weighs 2.48 kg and comes with two hanging straps, two rope clips and two washable pre-filters.\n\nIt does not come with a fan, and we do not sell the fan here, so plan for that separately. Match the fan to the 210 CFM figure, keep the ducting short, keep the filter dry, and wash the pre-filter when it gets dusty. That is most of the job.",
      "llm_summary": "This is a 4 inch (100 mm) inline carbon filter for grow tents and hydroponics spaces, model AC-DCF4 from AC Infinity, UPC 819137020665. It is about 12 inches (30 cm) long with an airflow rating of 210 CFM. The carbon is RC412 at 1200+ IAV in a 38 mm bed, held between galvanised steel mesh with reversible aluminium flanges, clamp-on mounting, and an overall weight of 2.48 kg. Two hanging straps, two rope clips and two washable pre-filters are included. An inline duct fan is required to draw air through the filter and is not included or sold with this item. Colour, material finish, country of origin and exact overall dimensions are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/carbon-filter/",
      "canonical_url": "https://nfthydroponics.co.nz/product/carbon-filter/",
      "json_url": "https://nfthydroponics.co.nz/api/products/carbon-filter.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 365.99
    },
    {
      "id": "indoor-grow-tent-1-2m",
      "sku": "indoor-grow-tent-1-2m",
      "title": "Indoor Grow Tent 1.2m x 1.2m x 2m Height",
      "slug": "indoor-grow-tent-1-2m",
      "price": 296,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "grow-tents",
      "category_label": "Grow Tents",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/main-indoor-grow-tent.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-2.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-6.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-7.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>Indoor Grow Tent | Growing Tent System | Hydroponic Grow Room</h2>\n<p>Supported with strong metal poles, the Oxford fabric <mark>grow tent</mark> is double-stitched for good light blockage</p>\n<p>Easy to install &amp; set up.</p>\n<p>A Variety Of Options to Choose From</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\nWhether it is sunny or rainy, summer or winter, the grow tent gives your plants an enclosed space where you control the light and humidity.\n\n<ul>\n<li>Double Side View</li>\n<li>Heavy-Duty Support Bars</li>\n<li>Easy Access</li>\n<li>Highly Reflective Lining</li>\n</ul>\n<h3>SPECIFICATIONS - 1.2m x 1.2m</h3>\n<p><img alt=\"buy indoor grow tent 1.2m wide\" height=\"1500\" src=\"/wp-content/uploads/2023/06/buy-indoor-grow-tent-1.2m-wide.jpg\" width=\"1500\"/></p>\n<h3>SPECIFICATIONS - 1.5m x 1.5m</h3>\n<p><img alt=\"buy indoor grow tent 1.5m wide\" height=\"1500\" src=\"/wp-content/uploads/2023/06/buy-indoor-grow-tent-1.5m-wide.jpg\" width=\"1500\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>\nDelivered Direct To Your Door - All Across New Zealand</p>\n<img alt=\"buy grow wtent for hydroponic system\" src=\"/wp-content/uploads/2023/06/buy-grow-tent-for-hydroponic-system.jpg\"/><img alt=\"buy grow tent kit\" src=\"/wp-content/uploads/2023/06/buy-grow-tent-kit.jpg\"/>\n<h3>Versatile Ports</h3>\nThis grow tent has 5 vent ports for temperature control &amp; 2 ground-level micro-mesh ports which allow for simple air intake. 2 cord ports help organize cables and keep the grow tent tidy. 3 zippered doors enable easy access, and the large one has Velcro tape for quick attachment.\n\n<h3>Efficient Lighting Control</h3>\nOne of the biggest advantages of using an indoor grow tent is the reflective property of interior walls. It ensures that you’re getting the most out of your indoor grow lights. The Mylar lining of this grow tent is listed as 95%~98% reflective. And the grow tent comes with wide flap inside the zipper which avoids any light leak.\n\n<h3>Durable Construction</h3>\nThis grow tent is made from 600D Oxford fabric. This helps the tent hold its internal conditions. And this indoor grow tent features powder coated steel frame with anti-aging heavy-duty PP corner connectors. \n\n<h3>Heavy-Duty Support Bars</h3>\nA grow tent lets you keep growing year-round by giving your indoor garden its own space. This indoor grow tent comes with 3 support bars which provide strong support for hanging all kinds of lights and fans to control lighting and temperature easily.\n\n<h3>Easy to Assemble &amp; Clean</h3>\nThis indoor grow tent is easy to install and no tools are needed. The spill-proof floor tray in the grow tent can hold quite a bit of liquid and is removable for stress-free cleanup, which helps if you spill water or nutrient solution.\n<img alt=\"buy hydroponic growing tent\" src=\"/wp-content/uploads/2023/06/buy-hydroponic-growing-tent.jpg\"/><img alt=\"buy indoor hydroponic tent\" src=\"/wp-content/uploads/2023/06/buy-indoor-hydroponic-tent.jpg\"/><img alt=\"buy fabric grow room\" src=\"/wp-content/uploads/2023/06/buy-fabric-grow-room.jpg\"/><img alt=\"buy indoor growing tent\" src=\"/wp-content/uploads/2023/06/buy-indoor-growing-tent.jpg\"/><img alt=\"buy hydroponics growing tent\" src=\"/wp-content/uploads/2023/06/buy-hydroponics-growing-tent.jpg\"/><img alt=\"buy grow tent for hydroponics\" src=\"/wp-content/uploads/2023/06/buy-grow-tent-for-hydroponics.jpg\"/>",
      "llm_summary": "Indoor Grow Tent 1.2m x 1.2m x 2m Height. NZD 296. Give your indoor growing equipment its own enclosed space. Choose the size that fits your room.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/indoor-grow-tent/",
      "canonical_url": "https://nfthydroponics.co.nz/product/indoor-grow-tent/",
      "json_url": "https://nfthydroponics.co.nz/api/products/indoor-grow-tent-1-2m.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 355
    },
    {
      "id": "indoor-grow-tent-1-5m",
      "sku": "indoor-grow-tent-1-5m",
      "title": "Indoor Grow Tent 1.5m x 1.5m x 2m Height",
      "slug": "indoor-grow-tent-1-5m",
      "price": 359,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "grow-tents",
      "category_label": "Grow Tents",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/main-indoor-grow-tent.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-2.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-6.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/indoor-grow-tent/indoor-grow-tent-7.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>Indoor Grow Tent | Growing Tent System | Hydroponic Grow Room</h2>\n<p>Supported with strong metal poles, the Oxford fabric <mark>grow tent</mark> is double-stitched for good light blockage</p>\n<p>Easy to install &amp; set up.</p>\n<p>A Variety Of Options to Choose From</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\nWhether it is sunny or rainy, summer or winter, the grow tent gives your plants an enclosed space where you control the light and humidity.\n\n<ul>\n<li>Double Side View</li>\n<li>Heavy-Duty Support Bars</li>\n<li>Easy Access</li>\n<li>Highly Reflective Lining</li>\n</ul>\n<h3>SPECIFICATIONS - 1.2m x 1.2m</h3>\n<p><img alt=\"buy indoor grow tent 1.2m wide\" height=\"1500\" src=\"/wp-content/uploads/2023/06/buy-indoor-grow-tent-1.2m-wide.jpg\" width=\"1500\"/></p>\n<h3>SPECIFICATIONS - 1.5m x 1.5m</h3>\n<p><img alt=\"buy indoor grow tent 1.5m wide\" height=\"1500\" src=\"/wp-content/uploads/2023/06/buy-indoor-grow-tent-1.5m-wide.jpg\" width=\"1500\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>\nDelivered Direct To Your Door - All Across New Zealand</p>\n<img alt=\"buy grow wtent for hydroponic system\" src=\"/wp-content/uploads/2023/06/buy-grow-tent-for-hydroponic-system.jpg\"/><img alt=\"buy grow tent kit\" src=\"/wp-content/uploads/2023/06/buy-grow-tent-kit.jpg\"/>\n<h3>Versatile Ports</h3>\nThis grow tent has 5 vent ports for temperature control &amp; 2 ground-level micro-mesh ports which allow for simple air intake. 2 cord ports help organize cables and keep the grow tent tidy. 3 zippered doors enable easy access, and the large one has Velcro tape for quick attachment.\n\n<h3>Efficient Lighting Control</h3>\nOne of the biggest advantages of using an indoor grow tent is the reflective property of interior walls. It ensures that you’re getting the most out of your indoor grow lights. The Mylar lining of this grow tent is listed as 95%~98% reflective. And the grow tent comes with wide flap inside the zipper which avoids any light leak.\n\n<h3>Durable Construction</h3>\nThis grow tent is made from 600D Oxford fabric. This helps the tent hold its internal conditions. And this indoor grow tent features powder coated steel frame with anti-aging heavy-duty PP corner connectors. \n\n<h3>Heavy-Duty Support Bars</h3>\nA grow tent lets you keep growing year-round by giving your indoor garden its own space. This indoor grow tent comes with 3 support bars which provide strong support for hanging all kinds of lights and fans to control lighting and temperature easily.\n\n<h3>Easy to Assemble &amp; Clean</h3>\nThis indoor grow tent is easy to install and no tools are needed. The spill-proof floor tray in the grow tent can hold quite a bit of liquid and is removable for stress-free cleanup, which helps if you spill water or nutrient solution.\n<img alt=\"buy hydroponic growing tent\" src=\"/wp-content/uploads/2023/06/buy-hydroponic-growing-tent.jpg\"/><img alt=\"buy indoor hydroponic tent\" src=\"/wp-content/uploads/2023/06/buy-indoor-hydroponic-tent.jpg\"/><img alt=\"buy fabric grow room\" src=\"/wp-content/uploads/2023/06/buy-fabric-grow-room.jpg\"/><img alt=\"buy indoor growing tent\" src=\"/wp-content/uploads/2023/06/buy-indoor-growing-tent.jpg\"/><img alt=\"buy hydroponics growing tent\" src=\"/wp-content/uploads/2023/06/buy-hydroponics-growing-tent.jpg\"/><img alt=\"buy grow tent for hydroponics\" src=\"/wp-content/uploads/2023/06/buy-grow-tent-for-hydroponics.jpg\"/>",
      "llm_summary": "Indoor Grow Tent 1.5m x 1.5m x 2m Height. NZD 359. Give your indoor growing equipment its own enclosed space. Choose the size that fits your room.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/indoor-grow-tent/",
      "canonical_url": "https://nfthydroponics.co.nz/product/indoor-grow-tent/",
      "json_url": "https://nfthydroponics.co.nz/api/products/indoor-grow-tent-1-5m.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 431
    },
    {
      "id": "rope-ratchet-hangers",
      "sku": "rope-ratchet-hangers",
      "title": "Rope Ratchet Hangers 6-Pair Pack with Carabiner Hooks",
      "slug": "rope-ratchet-hangers",
      "price": 148.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "grow-tents",
      "category_label": "Grow Tents",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/rope-ratchet-hangers/main-rope-ratchet-hangers.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/rope-ratchet-hangers/rope-ratchet-hangers-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/rope-ratchet-hangers/rope-ratchet-hangers-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/rope-ratchet-hangers/rope-ratchet-hangers-6.jpg"
      ],
      "description_short": "Six pairs of 8 ft braided polypropylene ropes with stainless steel ratchet gears and zinc-plated carabiner hooks, rated to 150 lb per pair, so you can raise or lower grow equipment in seconds.",
      "description": "The problem nobody warns you about\n\nYou buy the tent. You buy the light. You buy the fan and the filter. Then you stand in front of the whole thing holding a carbon filter in both arms, realising you have no sensible way to hold it in the air at the right height.\n\nZip ties work until you need to change something. String works until the knot slips. S-hooks work if your equipment happens to sit exactly where the hook puts it, which it never does. Meanwhile your plants are growing, which means the correct light height today is the wrong light height in nine days.\n\nRope ratchet hangers exist for that reason. They let height be an adjustment instead of a decision. Clip, pull, done. Change your mind next week and pull again.\n\nHow a rope ratchet hanger actually works\n\nThe design is old and borrowed from cargo strapping, which is a good sign. Each hanger is a length of rope running through a small housing with gears inside. Pull the rope one way and the gears let it pass, then bite down and hold when you stop. Squeeze the release and the gears open, letting the rope feed back the other way.\n\nIn this pack the rope is 1/8 inch braided polypropylene, 8 ft long, which is about 2.4 m. The gears inside the ratchet are stainless steel. Each end of the rope finishes in a zinc-plated steel carabiner hook.\n\nBraided rope matters more than people expect. Twisted rope tends to corkscrew under load and can bunch up at the gear teeth. Braided rope stays round and flat and runs through the housing cleanly, which is what you want when you are reaching over a canopy with one arm.\n\nThe carabiners matter too. A hook with an open mouth can jump off a bar during adjustment. A carabiner closes behind itself, so once it is on, it stays on until you deliberately open it.\n\nWhat the 150 lb rating really means\n\nThe rated capacity is 150 lb per pair, roughly 68 kg. Read that phrase carefully, because it is the single most misunderstood number in the whole category.\n\nPer pair means two hangers working together, one at each end of the load. It is not the rating for one hanger. When you plan a hang, assume the pair is the unit.\n\nIn practice, 68 kg is generous for home growing. A mid-sized LED bar fixture is a few kilos. A home inline fan might be two to five kilos. A carbon filter is the heavy one, and even a decent-sized filter in a home tent usually sits well under half the pair rating. The margin is there so that bumps, knocks and the small shock load of a filter swinging slightly do not take you anywhere near the limit.\n\nWhat you do need to check is the anchor. The hanger is only as strong as the thing it hangs from. Tent crossbars have their own weight ratings from the tent maker, and those are often the real limit in a soft-sided tent. If you are mounting to a ceiling joist or a shed rafter, make sure the fixing is into solid timber and not just plasterboard.\n\nWho these suit\n\nIf you grow herbs, salad leaves or vegetables indoors under lights, these are worth having from day one. Fast-growing leafy crops are exactly the plants that force you to change light height every few days, and a hanger that makes the change trivial is a hanger you will actually use.\n\nThey suit anyone with more than one piece of overhead gear. A light, a fan and a filter is three separate height problems, and each one wants to be independent of the others.\n\nThey suit people who rearrange. If you are the kind of grower who tries a different fan position, swaps a light, or moves the filter to the other corner once a season, a clip-on system beats anything permanent.\n\nThey are less essential if you have a single small fixture in a fixed spot that genuinely never moves, and if you have already got it exactly where you want it. Even then, one pair in a drawer is cheap insurance.\n\nWorking out how many pairs you need\n\nCount your hanging items, then add a couple. That is the honest answer.\n\nA standard home setup usually comes out at three pairs. One for the light, one for the inline fan, one for the carbon filter. This pack gives you six pairs, twelve hangers, so there are three pairs spare.\n\nThose spares get used faster than you think. A second light bar for a wider tent. A clip-on oscillating fan that you would rather suspend than clamp. A hanging pot for something trailing. Or simply a second tent, because almost nobody stops at one.\n\nIf you only need three pairs today, buying six is not waste. It is next season already covered.\n\nHanging gear without making a mess of it\n\nStart with the heaviest item, usually the filter, and get it in first while you still have room to move. Clip one hanger near each end of the item, not both at the middle, so the weight is shared and the item hangs level.\n\nLeave the ropes a little long at first. Hang everything roughly, then do a second pass to fine-tune heights. Trying to get every item perfect on the first attempt means you will redo it anyway once the ducting is connected.\n\nAdjust one side at a time. Pull the left hanger a few clicks, then the right, then the left again. Trying to lift both ends at once is how you end up with a crooked light bar and a sore back.\n\nWatch the tails. Loose rope hanging into the canopy is a nuisance and can shade leaves. Gather the slack and tuck it over the tent bar, or loop it loosely back on itself. Do not cut it unless you are certain the gear is staying at that height permanently.\n\nFinally, test every hang. Once the load is up, give it a gentle downward tug and watch the ratchet. It should not creep. Do that test every time you rehang something, not just the first time.\n\nLooking after them\n\nThere is very little to do, which is the point. Keep the ratchet housing free of grit, because soil in the gear teeth is the main thing that makes a smooth hanger feel notchy. A dry cloth over the rope and hooks every few weeks is plenty.\n\nDry them after watering splashes. Polypropylene handles damp far better than natural fibre rope, but leaving hardware wet in a warm tent is a habit worth avoiding anyway.\n\nInspect before each new build. Run the rope through your fingers and look for fraying, flat spots or nicks. Check the carabiner gates still spring closed properly. If a hanger looks tired, swap in one of your spares rather than hoping.\n\nFor storage, coil loosely. Knots left in rope for months set creases, and creases are where the braid starts to wear.\n\nA few common mistakes\n\nHanging a long filter from a single hanger in the middle. It will tilt, the ducting will kink and the load is concentrated in one spot. Use a pair.\n\nClipping into the tent fabric or a corner seam instead of the steel bar. The bar is the structural part.\n\nForgetting that wet soil is heavy. A hanging pot that weighs two kilos dry can double after a good water.\n\nAssuming the per pair rating applies to each hanger. It does not. Halve it in your head if you ever hang something on a single hanger.\n\nRunning the rope hard against a sharp metal edge. If the only route puts the rope over a corner, pad it or reposition the clip.\n\nThe short version\n\nTwelve hangers, six pairs, 8 ft of braided polypropylene rope each, stainless steel ratchet gears and zinc-plated steel carabiners, rated 150 lb per pair. That is the whole product.\n\nWhat you get for it is the ability to change the height of a light, a fan or a filter in about four seconds, as many times as you like, without untying a single knot. For a grower raising herbs and leafy greens that stretch upward every week, that is not a small convenience. It is the difference between adjusting your setup when it needs it and adjusting it when you finally get around to it.\n\nBuy enough pairs to cover everything overhead, hang the heavy things first, share every load across two hangers, and give each one a tug before you walk away.",
      "llm_summary": "Rope ratchet hangers from AC Infinity (model AC-RHA) are sold as a pack of 12 pieces, which is 6 pairs. Each hanger uses 1/8 inch braided polypropylene rope, 8 ft (about 2.4 m) long, with a stainless steel locking ratchet and zinc-plated steel carabiner hooks at both ends. The rated load capacity is 150 lb (about 68 kg) per pair. They are used to hang and height-adjust indoor growing equipment such as grow lights, inline fans, carbon filters, reflectors and hanging pots inside grow tents or on fixed overhead anchors. Colour is black. Listed item dimensions are 2.44 m by 0.03 m. Product weight, packed dimensions, country of origin and warranty are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/rope-ratchet-hangers/",
      "canonical_url": "https://nfthydroponics.co.nz/product/rope-ratchet-hangers/",
      "json_url": "https://nfthydroponics.co.nz/api/products/rope-ratchet-hangers.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 178.99
    },
    {
      "id": "trellis-netting",
      "sku": "trellis-netting",
      "title": "Polyester Trellis Netting 1.5 x 4.6 m",
      "slug": "trellis-netting",
      "price": 53.99,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "grow-tents",
      "category_label": "Grow Tents",
      "tags": [],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": "0.07 kg",
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/trellis-netting/main-trellis-netting.jpg",
        "https://nfthydroponics.co.nz/dropship-images/grow-tents/trellis-netting/trellis-netting-4.jpg"
      ],
      "description_short": "A 1.5 x 4.6 m white polyester net with 15 cm square cells, cut to fit and hung flat, vertically or as an A-frame for tomatoes, cucumbers, peas and beans.",
      "description": "The problem with plants that will not stand up\n\nAnyone who has grown tomatoes knows the moment. The plant looks great for weeks, then the first heavy truss sets and the whole thing starts to lean. You add a stake. A week later a side branch snaps under its own weight. By mid season the patch looks like a wrestling match between you, the twine and the plants.\n\nCucumbers do something similar, except they sprawl. Left on the ground, the fruit sits in damp soil, picks up marks, and gets found by slugs before you find it. Peas and beans just grab at whatever is nearest, which is often each other, and you end up with a tangled mat that is impossible to pick through.\n\nThe fix is simple and old. Give the plants a grid to grow into. Trellis netting does that across a whole bed or tent at once instead of one plant at a time, and it does it for a few dollars of material rather than a shed full of cages.\n\nWhat this net actually is\n\nThis is a polyester net measuring 1.52 m by 4.57 m, which works out to about 6.97 square metres of coverage. The openings are 15.24 cm square, or 6 x 6 inches in the old measurements. It is white, it weighs 0.07 kg, and one net comes in the pack.\n\nThe construction is interwoven, meaning the strands are locked where they cross rather than simply laid over each other. That is the part that matters in use. A net with loose junctions goes diamond shaped the moment weight pulls on one side, and once the grid distorts, the openings change size and plants get pinched. Locked junctions keep the squares square.\n\nThe strands themselves are smooth. Stems rub against a net constantly as wind moves outdoors or fans cycle indoors, and a rough surface slowly wears a groove into soft tissue. A smoother polyester trellis net is kinder to that contact point.\n\nWhy 15 cm openings are the right size\n\nMesh size is the spec people get wrong most often. The instinct is to go small, on the logic that smaller holes catch more. In practice, small mesh makes life hard.\n\nTry pulling a full size cucumber back out through a 5 cm opening. You cannot. You end up cutting the net or damaging the fruit. Now try putting your hand through to pinch out a side shoot deep in the canopy. Also no.\n\nAt 15 cm, an adult hand and forearm go straight through. You can reach in to tie a stem, pinch a tip, check for pests or take a fruit out without fighting the net. That is the whole point of a 15 cm mesh trellis net, and it is why this size has become the standard for indoor growers and serious vegetable gardeners alike.\n\nThe openings are still small enough to do the job. A tomato truss rests on a strand. A branch pushing sideways catches on the next cell along. Vines wrap through naturally without any help from you.\n\nThe three ways to hang it\n\nFlat and horizontal. This is the grow tent approach. You stretch the net across the growing area at a fixed height, usually somewhere above the pots where the plants start to branch out. Plants grow up through it, the net catches the branches, and the canopy spreads sideways instead of racing upward in a single column. You get more even light across the plants and fewer tall weak stems. As the crop builds, a second layer higher up adds more support.\n\nVertical. Run the net upright between posts, along a fence, or down one side of a frame. Climbing plants go straight up it. This is the classic approach for peas, beans and cucumbers, and the benefit is simple, the fruit hangs in open air where you can see it, and the leaves stay off wet soil. Vertical trellis netting also saves a huge amount of ground space in a small garden.\n\nA-frame. Two sloped frames leaning together with the net draped over both. This one suits heavier ground crops. Squash, eggplant and large cucumbers hang down under the slope where they are easy to spot, and the shaded soil underneath holds moisture a bit longer. It is also a nice use of a path edge or an awkward corner.\n\nYou are not locked into one choice. Cut the roll into two or three pieces and run a horizontal net in the tent plus a vertical section along the back fence.\n\nSetting it up without the usual mistakes\n\nTension is everything. A net hung loose will sag the moment fruit loads onto it, and once it sags, the plants slump with it and the whole structure stops working. Pull it taut when you fix it, anchor all four corners first, then add fixings every half metre or so along the edges.\n\nPut the net up before the plants need it. This is the single most common error. Threading a half grown tomato through a grid is fiddly and you will snap something. Set the net early and let the plants find it on their own.\n\nThink about access when you pick your mounting points. Leave yourself a way to get to the back of the bed or the far corner of the tent. A net stretched wall to wall with no access gap looks tidy and becomes annoying in about three weeks.\n\nFor fixings, zip ties, soft garden twine and clips all work. The net is cut to fit, so measure your run, cut through the middle of a cell rather than right at a junction, and keep the offcut for later.\n\nThrough the season\n\nOnce the net is up, the job becomes gentle steering. Every few days, walk the bed and tuck wandering shoots into the nearest opening. Spread branches so they fill empty cells instead of piling into one spot. It takes a couple of minutes and it keeps the canopy even.\n\nWatch for stems that have wedged into a corner as they thicken. If a shoot has got itself jammed, ease it out and redirect it before it marks. Most plants are forgiving if you catch it early.\n\nAt harvest, reach through and pick normally. That is the payoff for the larger mesh.\n\nCleaning and storing\n\nAt the end of the crop, leave the spent plants to dry for a few days. Dry stems break cleanly and come away from the mesh in pieces. Wet living vines do not, and pulling at them stretches the grid.\n\nWork along with secateurs and clear the net in sections. If it has gone sticky or grubby, hand wash in lukewarm water with a mild detergent, rinse it, and hang it to dry completely before packing. Damp storage is how nets end up smelling off.\n\nRoll or fold it loosely and keep it somewhere dry and out of the sun. Keep it clear of heaters and open flame. A reusable garden trellis netting panel that is stored properly comes out of the bag the next season ready to go.\n\nWho it suits\n\nIndoor growers with a tent will get the most obvious use out of it, because horizontal support is close to standard practice for keeping a canopy flat and well lit. Outdoor vegetable growers get just as much from it, particularly anyone short on space who wants to grow upward rather than outward.\n\nIt also suits people who are tired of the stake and string routine. One net handles a whole row at once, and it keeps working while you are away for a weekend.\n\nIf you only grow a couple of pots on a balcony, a full 4.6 m roll is more than you need, though you can cut a section and store the rest. For a bed, a row or a tent, it is about right.\n\nThe short version\n\nThis is a 1.52 x 4.57 m white polyester net with 15 cm square cells, interwoven so the grid holds its shape, and light enough at 0.07 kg to handle on your own. Cut it to fit. Hang it flat in a tent, upright along posts, or over an A-frame outdoors. Mount it tight, mount it early, and tuck the shoots in as they grow.\n\nDo that, and the plants carry their own fruit instead of leaning on you.",
      "llm_summary": "Polyester trellis netting from AC Infinity, model AC-TNA15, measuring 1.52 m x 4.57 m (5 x 15 ft) and covering about 6.97 square metres. The white net uses an interwoven polyester construction with 15.24 x 15.24 cm (6 x 6 in) square cells, sized so a hand fits through for pruning and picking. Item weight is 0.07 kg and the pack contains one net. It can be installed horizontally inside a grow tent, vertically against posts or a frame, or over an A-frame, and it can be cut to fit with scissors. Suited to tomatoes, cucumbers, peas, beans, eggplants and other climbing or sprawling crops. Country of origin and packaged dimensions are not specified in this record.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/trellis-netting/",
      "canonical_url": "https://nfthydroponics.co.nz/product/trellis-netting/",
      "json_url": "https://nfthydroponics.co.nz/api/products/trellis-netting.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 64.99
    },
    {
      "id": "hydroponics-growing-system",
      "sku": "hydroponics-growing-system",
      "title": "36 Position Hydroponics Growing System",
      "slug": "hydroponics-growing-system",
      "price": 199,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "nft-hydroponic-system",
      "category_label": "Hydroponic Systems",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/main-hydroponics-growing-system.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/hydroponics-growing-system-1.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/hydroponics-growing-system-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/hydroponics-growing-system-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/hydroponics-growing-system-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/hydroponics-growing-system-6.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/hydroponics-growing-system/hydroponics-growing-system-7.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>Hydroponics Growing System | Hydroponics Kit | Hydro Kits</h2>\n<p>This <mark>hydroponic growing system</mark> is extremely simple to assemble &amp; use. Great for beginners, no experience required</p>\n\nQuick &amp; Easy To Set Up. The complete package features 36 growing positions, an integrated water circulation pump, and all essential hardware for immediate setup.\n\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\nThe stackable configuration fits more growing positions into a small footprint, which suits apartments, patios and indoor spaces where floor area is limited.\n\n<h3>SPECIFICATIONS</h3>\n<p><img alt=\"best hydroponic system\" height=\"971\" src=\"/wp-content/uploads/2025/09/best-hydroponic-system.jpg\" width=\"1500\"/></p>\n<h3>COMES COMPLETE WITH</h3>\n<p><img alt=\"best hydroponics kit\" height=\"1500\" src=\"/wp-content/uploads/2025/09/best-hydroponics-kit.jpg\" width=\"1500\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>Direct To Your Door - All Across New Zealand</p>\n<img alt=\"best hydroponic system\" src=\"/wp-content/uploads/2025/09/best-hydroponic-system.jpg\"/><h3>All-in-One Hydroponic Growing Kit</h3>\nThis home gardening system has 36 growing positions, an integrated water circulation pump and the hardware to set it up. You add the nutrient solution and the seeds or seedlings.\n\n<h3>Compact, Vertical Design</h3>\nThe stackable configuration fits more growing positions into a small footprint, which suits apartments, patios and indoor spaces where floor area is limited.\n\n<h3>User-Friendly Operation</h3>\nInstallation and upkeep are straightforward. The built-in pump keeps the nutrient solution circulating, which keeps watering and drainage simple.\n\n<h3>Flexible Growing Options</h3>\nThe 36 individual growing stations accommodate diverse plant selections, from leafy greens and herbs to flowering plants. Choose and position the varieties you want to suit your taste and space.\n<img alt=\"best hydroponic growing system\" src=\"/wp-content/uploads/2025/09/best-hydroponic-growing-system.jpg\"/><img alt=\"best indoor hydroponic garden\" src=\"/wp-content/uploads/2025/09/best-indoor-hydroponic-garden.jpg\"/><img alt=\"best hydro grow system\" src=\"/wp-content/uploads/2025/09/best-hydro-grow-system.jpg\"/><img alt=\"best lettuce hydroponics\" src=\"/wp-content/uploads/2025/09/best-lettuce-hydroponics.jpg\"/><img alt=\"best vertical hydroponic garden\" src=\"/wp-content/uploads/2025/09/best-vertical-hydroponic-garden.jpg\"/><img alt=\"best hydro kits\" src=\"/wp-content/uploads/2025/09/best-hydro-kits.jpg\"/><img alt=\"best hydroponics kit\" src=\"/wp-content/uploads/2025/09/best-hydroponics-kit.jpg\"/><img alt=\"best indoor hydro garden\" src=\"/wp-content/uploads/2025/09/best-indoor-hydro-garden.jpg\"/>\n<img alt=\"hydroponics company new zealand\" src=\"/wp-content/uploads/2024/10/hydroponics-company-new-zealand.png\"/>\n\n<h2><strong>A guide to hydroponics growing systems</strong></h2>\n<p>A hydroponics growing system grows plants without soil. The nutrient solution delivers water and nutrients straight to the roots, and the system holds the plants up. This guide covers the main system types, the parts that matter and how to set one up.</p>\n<h2><strong>Types of Hydroponics Growing Systems</strong></h2>\n<h3><strong>Deep Water Culture (DWC)</strong></h3>\n<p>Plants sit in net pots with their roots hanging in oxygenated nutrient solution. It is a simple system and a common choice for beginners, and it suits leafy greens like lettuce, spinach and kale.</p>\n<h3><strong>Nutrient Film Technique (NFT)</strong></h3>\n<p>A thin film of nutrient solution flows past the roots along a gently sloping channel and back to the reservoir. NFT suits herbs and leafy greens.</p>\n<h3><strong>Ebb and Flow (Flood and Drain)</strong></h3>\n<p>The containers are flooded with nutrient solution and then drained back to the reservoir, so the roots get both nutrients and air. It can handle a wide range of plants, including tomatoes and peppers.</p>\n<h3><strong>Drip Systems</strong></h3>\n<p>Each plant is fed through its own drip line. Drip systems are often used for larger plants with longer growing cycles.</p>\n<h2><strong>Essential Components of Hydro Kits</strong></h2>\n<h3><strong>Pumps and Circulation</strong></h3>\n<p>The pump keeps the nutrient solution moving. Keep it clean, never let it run dry, and remember that in a pumped system a pump that stops means the roots stop getting fed.</p>\n<h3><strong>pH and Nutrient Monitoring</strong></h3>\n<p>Plants take up nutrients best within a pH range, so a pH meter and an EC or TDS meter are worth having. Meters are sold separately.</p>\n<h3><strong>Growing Media and Support</strong></h3>\n<p>Growing media such as expanded clay pebbles, rockwool or coco fibre hold the roots in place while letting water drain and air reach them.</p>\n<h2><strong>Choosing the Right Hydroponics Kit for Your Space</strong></h2>\n<h3><strong>Space</strong></h3>\n<p>Measure the space you have, whether it is a balcony, a garage or a spare room, and choose a system that fits it. Stacked and vertical systems fit more plants into a small floor area.</p>\n<h3><strong>Plants</strong></h3>\n<p>Let what you want to grow decide the system. Leafy greens and herbs suit DWC and NFT; tomatoes and peppers need a larger system such as ebb and flow or drip.</p>\n<h3><strong>Running costs</strong></h3>\n<p>Look at the whole cost: the purchase price, nutrients, electricity for the pump and any lights, and replacement parts.</p>\n<h2><strong>Setting Up Your Hydroponics Growing System</strong></h2>\n<h3><strong>Location</strong></h3>\n<p>Choose a spot with enough light, natural or from a grow light, steady temperatures, airflow and easy access to water and power.</p>\n<h3><strong>Assembly and Initial Setup</strong></h3>\n<p>Follow the instructions, check every connection, and run the system with water before you add plants. A small leak found during testing is easy to fix; the same leak after planting is not.</p>\n<h3><strong>Nutrient Solution Preparation</strong></h3>\n<p>Start with clean water, add nutrients according to the maker's instructions, and adjust the pH to suit your plants. Most vegetables prefer slightly acidic conditions, around pH 5.5 to 6.5.</p>",
      "llm_summary": "36 Position Hydroponics Growing System. A compact growing system with 36 positions and an integrated circulation pump. Hydroponics Company New Zealand. Current price NZD 199. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/hydroponics-growing-system/",
      "canonical_url": "https://nfthydroponics.co.nz/product/hydroponics-growing-system/",
      "json_url": "https://nfthydroponics.co.nz/api/products/hydroponics-growing-system.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 239
    },
    {
      "id": "nft-hydroponic-kit-108-cup-system",
      "sku": "nft-hydroponic-kit-108-cup-system",
      "title": "108 Cup NFT Hydroponic Kit",
      "slug": "nft-hydroponic-kit-108-cup-system",
      "price": 399,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "nft-hydroponic-system",
      "category_label": "Hydroponic Systems",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/main-nft-hydroponic-kit-108-cup-system.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-1.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-10.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-11.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-12.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-13.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-2.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-6.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-7.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-8.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-108-cup-system/nft-hydroponic-kit-108-cup-system-9.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>108 Cup NFT Hydroponics | Hydroponic System | Hydroponics Growing Kit</h2>\n\nThe <mark>hydroponics growing site</mark> is made of PVC for indoor or outdoor use\n\nIt is ideal for planting leafy vegetables such as lettuce, celery, beets, strawberries, and tomatoes in your home, garden, and office\n<video controls=\"\" src=\"/assets/video/buy-hydroponic-kit-online.mp4\"></video>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\nNo experience needed &amp; easy to take care of. This hydroponic indoor or outdoor grow system is designed for convenient vegetable gardening.\n\n<h3>SPECIFICATIONS</h3>\n<p><strong>Large Hydroponics Kit With 108 Pots </strong></p>\n<p>The dimensions of this Hydroponics Kit is 140 cm x 96 cm x 50 cm.<br/>This hydroponic system has 108 grow pots and is able to grow up to 108 plants at one time.</p>\n<h3>COMES COMPLETE WITH</h3>\n<p><img alt=\"cheapest nft hydroponic system purchase near me\" height=\"359\" src=\"/wp-content/uploads/2020/01/cheapest-nft-hydroponic-system-purchase-near-me.jpg\" width=\"750\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>Direct To Your Door - All Across New Zealand</p>\n<img alt=\"buy nft complete grow kits\" src=\"/wp-content/uploads/2020/06/hydroponic-kitchen-herb-garden.jpg\"/><p>This Hydroponics kit has 3 tiers which is great for staggering different growth cycles. It is one of our largest home hydroponic kits allowing you to grow up to 108 plants at any time.</p>\n<p>This kit is our most affordable kit per planting pot meaning you get the most grow for your buck. The benefit of this Large Hydroponic Kit is that you can start by using one tier and then over time increase your grow output.</p>\n<p>This allows you to scale up or down how much you are growing any time. This kit suits anyone who is looking to grow leafy greens for a medium or large family. Growing crops on rotation allows you to constantly be harvesting plants so you never run out of your favourite food.</p>\n<img alt=\"buy home hydroponic set up\" src=\"/wp-content/uploads/2022/04/buy-home-hydroponic-set-up.jpg\"/><img alt=\"buy home hydroponic kit\" src=\"/wp-content/uploads/2022/04/buy-home-hydroponic-kit.jpg\"/><img alt=\"where to buy Hydroponics Kits Quick Easy- online\" src=\"/wp-content/uploads/2020/05/where-to-buy-Hydroponics-Kits-Quick-Easy-online.jpg\"/><img alt=\"Vertical NFT hydroponic growing system\" src=\"/wp-content/uploads/2020/05/where-to-buy-Vertical-NFT-Hydroponics-Growing-System-online.jpg\"/>",
      "llm_summary": "108 Cup NFT Hydroponic Kit. Plan a larger home grow with 108 planting sites arranged across three tiers. Hydroponics Company New Zealand. Current price NZD 399. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/nft-hydroponic-kit-108-cup-system/",
      "canonical_url": "https://nfthydroponics.co.nz/product/nft-hydroponic-kit-108-cup-system/",
      "json_url": "https://nfthydroponics.co.nz/api/products/nft-hydroponic-kit-108-cup-system.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 479
    },
    {
      "id": "nft-hydroponic-kit-36-cup-system",
      "sku": "nft-hydroponic-kit-36-cup-system",
      "title": "36 Cup Hydroponic Kit",
      "slug": "nft-hydroponic-kit-36-cup-system",
      "price": 299,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "nft-hydroponic-system",
      "category_label": "Hydroponic Systems",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/main-nft-hydroponic-kit-36-cup-system.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-1.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-10.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-11.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-12.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-3.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-4.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-5.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-6.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-7.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-8.jpg",
        "https://nfthydroponics.co.nz/dropship-images/nft-hydroponic-system/nft-hydroponic-kit-36-cup-system/nft-hydroponic-kit-36-cup-system-9.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>36 Cup Hydroponic Kit | Hydroponic Vertical Garden | Hydroponic Set Up</h2>\n\nThis <mark>hydroponic gardening system</mark> is extremely simple to assemble and use. Great for beginners and no experience required\n\n<p>The hydroponics growing system kit for indoor &amp; outdoor is especially suitable for leafy vegetables in home &amp; offices, such as lettuce, rape, celery, beets, bell pepper, garlic seedlings, canola and more...</p>\n<video controls=\"\" src=\"/assets/video/buy-hydroponic-kit-online.mp4\"></video>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n<div <=\"\" div=\"\">\n<p>No experience needed &amp; easy to take care of. This hydroponic indoor or outdoor grow system is designed for convenient vegetable gardening.</p>\n<h3>SPECIFICATIONS</h3>\n<p><strong>Slanted Hydroponics Kit With 36 Pots Dimensions and growing capacity</strong></p>\n<p>The dimensions of this Hydroponics Kit is 98 cm x 108 cm x 52 cm.<br/>This hydroponic system has 36 grow pots and is able to grow up to 36 plants at one time.</p>\n<h3>COMES COMPLETE WITH</h3>\n<p><img alt=\"cheapest nft hydroponic system purchase near me\" height=\"359\" src=\"/wp-content/uploads/2020/01/cheapest-nft-hydroponic-system-purchase-near-me.jpg\" width=\"750\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>Direct To Your Door - All Across New Zealand</p>\n<img alt=\"buy hydroponic gardening system grow kit\" src=\"/wp-content/uploads/2023/04/buy-hydroponic-gardening-system-grow-kit.jpg\"/><img alt=\"Vertical NFT hydroponic growing system\" src=\"/wp-content/uploads/2020/05/where-to-buy-Vertical-NFT-Hydroponics-Growing-System-online.jpg\"/><p>This slanted hydroponics kit can be placed next to windows and still receive full sun. It is a good choice for a balcony or indoors and is one of our most popular starter kits.</p>\n<p>Growing with this kit is not complicated. It is designed for beginner growers; add a reservoir tank, nutrients and seeds and you can start growing.</p>\n<p>How soon you harvest depends on the crop and conditions, and with hydroponics you can grow all year round for repeat harvests.</p>\n<img alt=\"where to buy Hydroponics Kits Quick Easy- online\" src=\"/wp-content/uploads/2020/05/where-to-buy-Hydroponics-Kits-Quick-Easy-online.jpg\"/><img alt=\"buy nft complete grow kits\" src=\"/wp-content/uploads/2020/06/hydroponic-kitchen-herb-garden.jpg\"/>\n<h2>What is included when you buy this Hydroponic System from us.</h2>\n<ol>\n<li>36 plant site</li>\n<li>Hydroponic gully’s with connectors to assemble the kit.</li>\n<li>An inner blocking design that makes the water travel in an S shape down the kit.</li>\n<li>The water with hydroponic nutrients is inside the system so the plants roots and the nutrient water is not exposed to sunshine protecting both the plants and the nutrient water.</li>\n<li>This Hydroponics system also Includes a Hydroponics water pump with a NZ Plug so no adapters are needed</li>\n</ol>\n<h3>What is not included</h3>\n<p>You will need to provide your own reservoir tank with this hydroponics kit. This is used to store nutrients and you place the pump inside to circulate the hydroponic nutrients. A non-transparent tanks/buckets with a cover are better. This will stop sunlight from getting into the reservoir as sunlight will encourage growth of algae in the hydroponic solution. The best capacity for the reservoir is 15 to 20 L .</p>",
      "llm_summary": "36 Cup Hydroponic Kit. Make room for herbs and leafy greens with a 36-site hydroponic frame. Hydroponics Company New Zealand. Current price NZD 299. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/nft-hydroponic-kit-36-cup-system/",
      "canonical_url": "https://nfthydroponics.co.nz/product/nft-hydroponic-kit-36-cup-system/",
      "json_url": "https://nfthydroponics.co.nz/api/products/nft-hydroponic-kit-36-cup-system.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 359
    },
    {
      "id": "seed-starter-container",
      "sku": "seed-starter-container",
      "title": "Seed Starter Trays, Pack of 5",
      "slug": "seed-starter-container",
      "price": 89,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "accessories",
      "category_label": "Seed Trays",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/main-seed-starter-container.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-1.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-2.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-3.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-4.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-5.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-6.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-7.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-8.jpg",
        "https://nfthydroponics.co.nz/product-images/accessories/seed-starter-container/seed-starter-container-9.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>Seed Starter Container | Seedling Grow Trays | Plant Starter Trays</h2>\n<mark>Seedling Grow Trays</mark> For Organised Seed Starting\n\n<p>Pack of 5 reusable plant starter tray kits with humidity domes and drainage holes. PVC seedling starting trays that create a covered growing environment. Germination time depends on the seed variety and growing conditions. Includes small gardening tools.</p>\n<p>Pack of x5</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\nA humidity dome keeps moisture in while seeds germinate.\n\n<h3>SPECIFICATIONS</h3>\n<p><img alt=\"best seedling trays for sale\" height=\"1500\" src=\"/wp-content/uploads/2025/11/best-seedling-trays-for-sale.jpg\" width=\"1500\"/></p>\n<p><img alt=\"best plant starter trays\" height=\"1500\" src=\"/wp-content/uploads/2025/11/best-plant-starter-trays.jpg\" width=\"1500\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>Direct To Your Door - All Across New Zealand</p>\n<p>Pack of x5</p>\n<img alt=\"best seedling trays for sale\" src=\"/wp-content/uploads/2025/11/best-seedling-trays-for-sale.jpg\"/><img alt=\"best seedling trays with dome \" src=\"/wp-content/uploads/2025/11/best-starter-trays-for-seeds.jpg\"/>\n<h3>Adjustable vents</h3>\nAdjustable air vents let you control temperature and humidity under the cover, from warm-weather crops like peppers to cold-hardy lettuce.\n\n<h3>Built-In Drainage Protection</h3>\nDrainage openings at the base of each cell let excess water out, so the growing medium does not sit waterlogged.\n\n<h3>Independent Growing Chambers</h3>\nEach transparent cover transforms your seed tray into a dedicated mini-greenhouse. The clear cover lets light reach your seeds while keeping in warmth and humidity.\n\n<h3>Reusable trays</h3>\nThe plastic trays can be cleaned and reused, and they are light enough to move when full.\n\n<h3>Everything Included for Immediate Growing</h3>\nUnpack and start planting right away with five individual seed trays featuring separated cells, five catch trays that manage overflow and keep surfaces clean, five adjustable humidity covers, and identification labels for organizing different plant varieties. You add the seed starting mix and the seeds.\n<img alt=\"best self watering seedling tray \" src=\"/wp-content/uploads/2025/11/best-plant-seedling-trays.jpg\"/><img alt=\"best self watering seed tray\" src=\"/wp-content/uploads/2025/11/best-self-watering-seed-tray.jpg\"/><img alt=\"best plant starter trays\" src=\"/wp-content/uploads/2025/11/best-plant-starter-trays.jpg\"/><img alt=\"best reusable seed starting trays\" src=\"/wp-content/uploads/2025/11/best-reusable-seed-starting-trays.jpg\"/><img alt=\"best seedling trays near me\" src=\"/wp-content/uploads/2025/11/best-seedling-trays-near-me.jpg\"/><img alt=\"best seedling trays with dome\" src=\"/wp-content/uploads/2025/11/best-seedling-trays-with-dome.jpg\"/><img alt=\"best seed starter tray\" src=\"/wp-content/uploads/2025/11/best-seed-starter-tray.jpg\"/><img alt=\"best seedling trays with lids\" src=\"/wp-content/uploads/2025/11/best-seedling-trays-with-lids.jpg\"/><img alt=\"best nursery seedling trays\" src=\"/wp-content/uploads/2025/11/best-nursery-seedling-trays.jpg\"/><img alt=\"best self watering seedling tray\" src=\"/wp-content/uploads/2025/11/best-self-watering-seedling-tray.jpg\"/><img alt=\"best seed starting trays with dome\" src=\"/wp-content/uploads/2025/11/best-seed-starting-trays-with-dome.jpg\"/>",
      "llm_summary": "Seed Starter Trays, Pack of 5. Start seeds in reusable trays with individual growing cells and humidity covers. Hydroponics Company New Zealand. Current price NZD 89. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/seed-starter-container/",
      "canonical_url": "https://nfthydroponics.co.nz/product/seed-starter-container/",
      "json_url": "https://nfthydroponics.co.nz/api/products/seed-starter-container.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 107
    },
    {
      "id": "deep-water-culture-hydroponic-system",
      "sku": "11-cup-system",
      "title": "11 Cup Deep Water Culture Kit",
      "slug": "deep-water-culture-hydroponic-system",
      "price": 199,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "deep-water-culture-hydroponic-system",
      "category_label": "Deep Water Culture",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/product-images/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system/main-deep-water-culture-hydroponic-system.jpg",
        "https://nfthydroponics.co.nz/product-images/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system-1.jpg",
        "https://nfthydroponics.co.nz/product-images/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system-2.jpg",
        "https://nfthydroponics.co.nz/product-images/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system-3.jpg",
        "https://nfthydroponics.co.nz/product-images/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system-4.jpg",
        "https://nfthydroponics.co.nz/product-images/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system/deep-water-culture-hydroponic-system-5.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>Deep Water Culture Hydroponic System | DWC 11 Cup System | Hydroponic Garden Systems</h2>\n<p>A complete <mark>DWC Hydroponic Growing Kit Set</mark> for growing your own fresh food &amp; herbs. Add nutrients and seeds.</p>\n<p>Simple &amp; Quick To Set Up - a good first kit for anyone starting out as an indoor vegetable grower</p>\n<p>x11 Site System</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\n<p>Simple to assemble and use, this hydroponic indoor or outdoor grow system is designed for convenient vegetable gardening. Suitable for beginners. No experience needed.</p>\n<p>This home garden set uses hydroponics technology to grow fresh herbs and other plants without messy soil or the stress of over or under watering.</p>\n<p><strong>Suits plant lovers and beginner gardeners.</strong></p>\n<h3>SPECIFICATIONS</h3>\n<p><img alt=\"deep water culture recirculating system\" height=\"1000\" src=\"/wp-content/uploads/2021/01/deep-water-culture-recirculating-system.jpg\" width=\"1000\"/></p>\n<p><img alt=\"dwc bucket system\" height=\"1000\" src=\"/wp-content/uploads/2021/01/dwc-bucket-system.jpg\" width=\"1000\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>\nDelivered Direct To Your Door - All Across New Zealand</p>\n<img alt=\"dwc system online supplier\" src=\"/wp-content/uploads/2021/01/dwc-system-online-supplier.jpg\"/><img alt=\"deep water culture recirculating system\" src=\"/wp-content/uploads/2021/01/deep-water-culture-recirculating-system.jpg\"/>\n<p><strong>Package includes:</strong> 1 x Box (seeds not included), 1 x Aquarium Air Pump, 1 x Buoy, 11 x Planting Baskets, 11 x Planting Sponges, 1 x Buoy Deck, 1 x Tweezers, 1 x Silicone Hose</p>\n<h3>COMPLETE KIT</h3>\nThe kit includes an air pump and a medium sized DWC box, a water level indicator, assembly instructions, planting baskets and planting sponges. Seeds and nutrients are not included.\n\n<h3>Grower, cloner and seed starter</h3>\n<p>Use it to root seeds, cuttings or small plants.</p>\n<h3>Light-blocking design</h3>\n<p>The basin cover and planting basket are made from special material, preventing light from entering the container to reduce the growth of green alga. The buoy can be inserted through a hollow cylindrical hole, to show the nutrient solution level to remind you to add some solution or water.</p>\n<h3> Growth rates depend on the crop, lighting and growing conditions</h3>\n<p>The roots sit in the nutrient solution, so they get water and nutrients without searching soil for them. A good indoor herb garden kit.</p>\n<p>Growth rates depend on the crop, lighting and growing conditions. The air pump pushes the air through an air tube and into the basin to keep the solution oxygenated. (If the pump can not work properly, the blue valve is put on backwards. Please just flip it around so the the pump would pump air into the solution)</p>\n<h3>For beginners</h3>\nA good first kit for anyone starting out as an indoor vegetable grower.\n\n<h3>Fresh from home</h3>\nPick herbs and greens at home when you want them; unlike shop fruit and veg, they have not travelled far.\n<img alt=\"deep water culture systems\" src=\"/wp-content/uploads/2021/01/deep-water-culture-systems.jpg\"/><img alt=\"deep water culture aquaponics system\" src=\"/wp-content/uploads/2021/01/deep-water-culture-aquaponics-system.jpg\"/><img alt=\"dwc systems for sale\" src=\"/wp-content/uploads/2021/01/dwc-systems-for-sale.jpg\"/><img alt=\"hydroponics grower kit\" src=\"/wp-content/uploads/2021/01/hydroponics-grower-kit-.jpg\"/>",
      "llm_summary": "11 Cup Deep Water Culture Kit. Start a soil-free growing project with an 11-cup deep water culture kit. Hydroponics Company New Zealand. Current price NZD 199. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/deep-water-culture-hydroponic-system/",
      "canonical_url": "https://nfthydroponics.co.nz/product/deep-water-culture-hydroponic-system/",
      "json_url": "https://nfthydroponics.co.nz/api/products/deep-water-culture-hydroponic-system.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 239
    },
    {
      "id": "grow-lights",
      "sku": "grow-lights",
      "title": "Dual Head LED Grow Light",
      "slug": "grow-lights",
      "price": 55,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "led-grow-lights",
      "category_label": "Grow Lights",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/grow-lights/main-grow-lights.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>LED Grow Light | Grow Lamp | Growing Lamp</h2>\n<p>Dual head 40 W <mark>LED growth light</mark> with flexible goose neck so you can aim the light at your plants</p>\n<p>LED lamp rated at 40 W. Running costs depend on your electricity tariff and hours of use.</p>\n<video controls=\"\" src=\"/assets/video/where-to-buy-led-grow-lights-online-wr.mp4\"></video>\n<p>40W - Dual Head With Timer</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\n<p>A 40W plant grow light for a small hydroponic system or a tray of seedlings.</p>\n<p>With a strong clamp and gooseneck 2 head strips of 40 leds to cover a wide area.</p>\n<p>Comes with a built-in timer (3, 9 or 12 hours).</p>\n<h3>SPECIFICATIONS</h3>\n<p><img alt=\"home led grow lights for sale\" height=\"544\" src=\"/wp-content/uploads/2021/02/home-led-grow-lights-for-sale.jpg\" width=\"1500\"/></p>\n<p><img alt=\"hydroponic led light kit\" height=\"1000\" src=\"/wp-content/uploads/2021/02/hydroponic-led-light-kit.jpg\" width=\"1000\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>\nDelivered Direct To Your Door - All Across New Zealand</p>\n<img alt=\"buy grow lights led\" src=\"/wp-content/uploads/2021/02/buy-grow-lights-ed.jpg\"/><h3>TIMER FUNCTION</h3>\n<p>Smart timing function power connection (please confirm the supplied connector). Set it up for lighting 3 hour / 9 hour / 12 hours, but also adjust the brightness of the led grow light strips and the distance between the grow lamp and plant according to specific plant needs.</p>\n<h3>RED/BLUE LED COMBINATION</h3>\n<p>This LED grow light creates targeted wavelengths for plants. Each head has 14 blue LED chips and 26 red LED chips. Blue light is used mainly for leafy growth; red light for flowering. </p>\n<h3>adjustable brightness &amp; 3 COLOURS</h3>\n<p>LED plant light has adjustable brightness to suit a variety of stages in plant growth. With 3 colour modes you are able to switch the growing lights off or on to suit your plants/vegetables needs.</p>\n<ul>\n<li>3 Switch Modes: Red Light On, Blue Light On and Both Light On.</li>\n<li>adjustable brightness: 20, 30, 40, 50, 60, 70, 80, 90 and 100% Brightness.</li>\n</ul>\n<h3>POWERFUL CLAMP &amp; MULTIPLE USES</h3>\n<p>The clamp fits onto anything up to 6cm | 2.5 inches thick.</p>\n<h3>360 Degree Rotatable Flexible Gooseneck</h3>\nThe led grow light with 360 degrees rotatable flexible gooseneck, it's so easy to adjust and place anywhere, so you can aim the light in any direction.\n<img alt=\"hydroponics led light kit\" src=\"/wp-content/uploads/2021/02/hydroponics-led-light-kit.jpg\"/><img alt=\"hydroponic grow lights\" src=\"/wp-content/uploads/2021/02/hydroponic-grow-lights.jpg\"/>\n<h3>Questions about this light</h3>\n\n<img alt=\"online hydroponics company new zealand\" src=\"/wp-content/uploads/2023/12/online-hydroponics-company-new-zealand.png\"/>\n\n<h3>Does this have a power connection (please confirm the supplied connector) in the power cord?</h3>\n<p>No power connection (please confirm the supplied connector), just a power cord.</p>\n<h3>Can this grow light stand up on its own without being clipped onto something?</h3>\nThis has to be clipped to something\n\n<h3>How long is the life of the lights? How many hours?</h3>\n50,000hrs\n\n<h3>Are you supposed to remove thin layer of plastic from the light strip before use?</h3>\nYes\n\n<h3>Does this plant grow light work great with fruits?</h3>\nIt can be used for potted flowers, fruit, herbs and indoor plants, including hydroponics. There are nine brightness levels.\n\n<h3>How long is power cord?</h3>\naround 8 inches | 20cm\n\n<h3>How do I get this to work on a timed outlet? I need 12h/12h</h3>\nThe time controller is part of the mechanism to turn the device on and off with, and not part of the remote. The built-in timer offers 3, 9 or 12 hour cycles.\n\n<h3>Is it good for starting vegetable seeds?</h3>\nYes, it can be used for starting vegetable seeds, and for fruit and herb plants.\n\n<h3>What is the distance between the clamp on to where it starts to bend?</h3>\nThe clamp bends from the base\n\n<h3>Will this light hurt my furniture ?</h3>\nThe clip comes with a thick EVA pad which protects any furniture you are clamping to. The lighting will not affect any furniture\n\n<h3>Will it increase my electric bill?</h3>\n<p>It is rated at 40 W, so the running cost depends on your electricity tariff and how many hours a day you run it.</p>\n<h3>What is the gooseneck length?</h3>\n<p>The actual gooseneck section is 28cm | 11 inches, the light section is 22cm | 8.5 inches. The connection pieces make it slightly longer.</p>",
      "llm_summary": "Dual Head LED Grow Light. Position two adjustable light heads over seedlings or smaller indoor plants. Hydroponics Company New Zealand. Current price NZD 55. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/grow-lights/",
      "canonical_url": "https://nfthydroponics.co.nz/product/grow-lights/",
      "json_url": "https://nfthydroponics.co.nz/api/products/grow-lights.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 66
    },
    {
      "id": "led-grow-lights",
      "sku": "led-grow-lights",
      "title": "90 cm T8 Grow Lights, 9 Lamp Kit",
      "slug": "led-grow-lights",
      "price": 329,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "led-grow-lights",
      "category_label": "Grow Lights",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/main-led-grow-lights.jpg",
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/led-grow-lights-1.jpg",
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/led-grow-lights-2.jpg",
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/led-grow-lights-3.jpg",
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/led-grow-lights-5.jpg",
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/led-grow-lights-6.jpg",
        "https://nfthydroponics.co.nz/product-images/led-grow-lights/led-grow-lights/led-grow-lights-7.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>LED Grow Lights Strips | T8 Growing Lamps | Plant Light</h2>\n<p><mark>T8 LED Grow Lights</mark> are suitable for fruit production, plant propagation, indoor gardening and indoor hydroponics</p>\n<p>Easily link up the long life (30 000 hours) LED grow light strips in a series, saving installation cost &amp; time</p>\n<p>90cm Long LED Grow Lights  x 9 Lamp Kit</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\n<ul>\n<li>Full spectrum grow lights on an aluminium body</li>\n<li>Supplier-rated service life of 30 000 hours</li>\n<li>LED chips under a clear PC cover</li>\n<li>Plug-and-play. Easy to install</li>\n</ul>\n<h3>SPECIFICATIONS</h3>\n<ul>\n<li><strong>Light Source:</strong> SMD-2835LED</li>\n<li><strong>Colour Ratio:</strong> R:W=1:2 | R:B=4:1 | W:R:B=1:2:3</li>\n<li><strong>Material:</strong> Aviation grade aluminium | Fibreglass panels</li>\n<li><strong>Input Voltage Range:</strong> 85V to 265V AC</li>\n<li><strong>Frequency Range:</strong> 50Hz/60Hz  +/- 1 5%</li>\n<li><strong>Input Power:</strong> 18W</li>\n<li><strong>Weight:</strong> 265 grams</li>\n<li><strong>IP Rating</strong>: 44</li>\n<li><strong>Chip:</strong> EpiStar Chip</li>\n</ul>\n<p><img alt=\"led plant grow light series\" height=\"1000\" src=\"/wp-content/uploads/2020/11/led-plant-grow-light-series.jpg\" width=\"1000\"/></p>\n\n<h3>LIGHT SPECTRUM</h3>\n<p><img alt=\"buy full spectrum led grow light\" height=\"1000\" src=\"/wp-content/uploads/2023/02/buy-full-spectrum-led-grow-light.jpg\" width=\"1000\"/></p>\n\n<h3>INSTALLATION</h3>\n<p><img alt=\"buy growing lamps\" height=\"293\" src=\"/wp-content/uploads/2023/02/buy-growing-lamps.jpg\" width=\"1000\"/></p>\n<p><img alt=\"buy led grow light\" height=\"475\" src=\"/wp-content/uploads/2023/02/buy-led-grow-light.jpg\" width=\"1000\"/></p>\n<p><img alt=\"buy led grow lights\" height=\"1000\" src=\"/wp-content/uploads/2023/02/buy-led-grow-lights.jpg\" width=\"1000\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>Direct To Your Door - All Across New Zealand</p>\n<mark>Pack of x9 - 90cm Long Grow Lights</mark>\n<img alt=\"buy plant light\" src=\"/wp-content/uploads/2023/02/buy-plant-light.jpg\"/><img alt=\"led plant grow light series\" src=\"/wp-content/uploads/2020/11/led-plant-grow-light-series.jpg\"/>\n<h2>Full spectrum grow light</h2>\n<p>A full spectrum light covers the range of light plants use through their growth stages.</p>\n<h3>EASY INSTALLATION</h3>\n<p>Grow Light Tubes can be connected series in a line and it can be connected by connecting flexible cords, so one supply can feed a run of lights.</p>\n<h3>Multiple Use</h3>\n<p>The grow lights suit fruit production, plant propagation, indoor gardening and indoor hydroponics.</p>\n<img alt=\"buy full spectrum led grow light\" src=\"/wp-content/uploads/2023/02/buy-full-spectrum-led-grow-light.jpg\"/><img alt=\"buy growing lamp\" src=\"/wp-content/uploads/2023/02/buy-growing-lamp.jpg\"/><img alt=\"buy growing lamps\" src=\"/wp-content/uploads/2023/02/buy-growing-lamps.jpg\"/><img alt=\"buy led grow light\" src=\"/wp-content/uploads/2023/02/buy-led-grow-light.jpg\"/><img alt=\"led plant grow lights\" src=\"/wp-content/uploads/2020/11/led-plant-grow-lights.jpg\"/><img alt=\"buy led grow lights\" src=\"/wp-content/uploads/2023/02/buy-led-grow-lights.jpg\"/><img alt=\"buy hydroponic grow light online\" src=\"/wp-content/uploads/2023/02/buy-hydroponic-lights.jpg\"/><img alt=\"buy hydroponic grow light online\" src=\"/wp-content/uploads/2023/02/buy-hydroponic-lighting.jpg\"/><img alt=\"buy hydroponic grow light online\" src=\"/wp-content/uploads/2020/11/buy-hydroponic-grow-light-online.jpg\"/><img alt=\"buy hydroponics grow lights online\" src=\"/wp-content/uploads/2020/11/buy-hydroponics-grow-lights-online.jpg\"/>",
      "llm_summary": "90 cm T8 Grow Lights, 9 Lamp Kit. Add lighting along your growing area with a kit of nine 90 cm T8 lamps. Hydroponics Company New Zealand. Current price NZD 329. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/led-grow-lights/",
      "canonical_url": "https://nfthydroponics.co.nz/product/led-grow-lights/",
      "json_url": "https://nfthydroponics.co.nz/api/products/led-grow-lights.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 395
    },
    {
      "id": "home-hydroponic-system",
      "sku": "home-hydroponic-system",
      "title": "11 Cup Hydroponic Planter",
      "slug": "home-hydroponic-system",
      "price": 199,
      "currency": "NZD",
      "availability": "in_stock",
      "category": "nft-hydroponic-system",
      "category_label": "Hydroponic Systems",
      "tags": [
        "hydroponics"
      ],
      "colors": [],
      "materials": [],
      "dimensions": null,
      "weight": null,
      "images": [
        "https://nfthydroponics.co.nz/product-images/nft-hydroponic-system/home-hydroponic-system/main-home-hydroponic-system.jpg",
        "https://nfthydroponics.co.nz/product-images/nft-hydroponic-system/home-hydroponic-system/home-hydroponic-system-1.jpg",
        "https://nfthydroponics.co.nz/product-images/nft-hydroponic-system/home-hydroponic-system/home-hydroponic-system-2.jpg",
        "https://nfthydroponics.co.nz/product-images/nft-hydroponic-system/home-hydroponic-system/home-hydroponic-system-3.jpg",
        "https://nfthydroponics.co.nz/product-images/nft-hydroponic-system/home-hydroponic-system/home-hydroponic-system-4.jpg",
        "https://nfthydroponics.co.nz/product-images/nft-hydroponic-system/home-hydroponic-system/home-hydroponic-system-5.jpg"
      ],
      "description_short": "Choose your setup, check the specifications, and start planning your next grow.",
      "description": "<h2>Hydroponic Planter | Hydroponic Grow Kit | Hydroponic Herb Garden</h2>\n\nA complete <mark>Hydroponic Growing Kit Set</mark> for growing your own fresh food &amp; herbs. Add nutrients and seeds.\n\n<p>Simple &amp; Quick To Set Up - a good first kit for anyone starting out as an indoor vegetable grower</p>\n<p>x11 Site System</p>\n<p>Free standard delivery across New Zealand on orders of $50 or more ($22 below that).</p>\n\n<p>Simple to assemble and use, this hydroponic indoor or outdoor grow system is designed for convenient vegetable gardening. Suitable for beginners. No experience needed.</p>\n<p>This home garden set uses hydroponics technology to grow fresh herbs and other plants without messy soil or the stress of over or under watering.</p>\n<p><strong>Suits plant lovers and beginner gardeners.</strong></p>\n<h3>SPECIFICATIONS</h3>\n<p><img alt=\"deep water culture recirculating system\" height=\"1000\" src=\"/wp-content/uploads/2021/01/deep-water-culture-recirculating-system.jpg\" width=\"1000\"/></p>\n<p><img alt=\"dwc bucket system\" height=\"1000\" src=\"/wp-content/uploads/2021/01/dwc-bucket-system.jpg\" width=\"1000\"/></p>\n\n<p>Estimated delivery: 5-7 DAYS DELIVERY<br/>Direct To Your Door - All Across New Zealand</p>\n<img alt=\"dwc system online supplier\" src=\"/wp-content/uploads/2021/01/dwc-system-online-supplier.jpg\"/><img alt=\"deep water culture recirculating system\" src=\"/wp-content/uploads/2021/01/deep-water-culture-recirculating-system.jpg\"/>\n<p><strong>Package includes:</strong> 1 x Box (seeds not included), 1 x Aquarium Air Pump, 1 x Buoy, 11 x Planting Baskets, 11 x Planting Sponges, 1 x Buoy Deck, 1 x Tweezers, 1 x Silicone Hose</p>\n<h3>COMPLETE KIT</h3>\nThe kit includes an air pump and a medium sized DWC box, a water level indicator, assembly instructions, planting baskets and planting sponges. Seeds and nutrients are not included.\n\n<h3>Grower, cloner and seed starter</h3>\n<p>Use it to root seeds, cuttings or small plants.</p>\n<h3>Light-blocking design</h3>\n<p>The basin cover and planting basket are made from special material, preventing light from entering the container to reduce the growth of green alga. The buoy can be inserted through a hollow cylindrical hole, to show the nutrient solution level to remind you to add some solution or water.</p>\n<h3> Growth rates depend on the crop, lighting and growing conditions</h3>\n<p>The roots sit in the nutrient solution, so they get water and nutrients without searching soil for them. A good indoor herb garden kit.</p>\n<p>Growth rates depend on the crop, lighting and growing conditions. The air pump pushes the air through an air tube and into the basin to keep the solution oxygenated. (If the pump can not work properly, the blue valve is put on backwards. Please just flip it around so the the pump would pump air into the solution)</p>\n<h3>For beginners</h3>\nA good first kit for anyone starting out as an indoor vegetable grower.\n\n<h3>Fresh from home</h3>\nPick herbs and greens at home when you want them; unlike shop fruit and veg, they have not travelled far.\n<img alt=\"deep water culture systems\" src=\"/wp-content/uploads/2021/01/deep-water-culture-systems.jpg\"/><img alt=\"deep water culture aquaponics system\" src=\"/wp-content/uploads/2021/01/deep-water-culture-aquaponics-system.jpg\"/><img alt=\"dwc systems for sale\" src=\"/wp-content/uploads/2021/01/dwc-systems-for-sale.jpg\"/><img alt=\"hydroponics grower kit\" src=\"/wp-content/uploads/2021/01/hydroponics-grower-kit-.jpg\"/>",
      "llm_summary": "11 Cup Hydroponic Planter. An 11-cup planter for growing herbs and leafy greens in nutrient solution. Hydroponics Company New Zealand. Current price NZD 199. Free standard delivery from NZD 50; NZD 22 otherwise.",
      "returnable": true,
      "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
      "shipping_profile": "standard",
      "warranty": null,
      "brand": "Hydroponics Company New Zealand",
      "gtin": null,
      "mpn": null,
      "condition": "new",
      "url": "https://nfthydroponics.co.nz/product/home-hydroponic-system/",
      "canonical_url": "https://nfthydroponics.co.nz/product/home-hydroponic-system/",
      "json_url": "https://nfthydroponics.co.nz/api/products/home-hydroponic-system.json",
      "updated_at": "2026-11-10",
      "compare_at_price": 239
    }
  ]
}
